greenhobby
Dabbler
- Joined
- Mar 19, 2013
- Messages
- 10
Hi All,
I recently downsized my home server to save on power to a Gigabyte Z170 system (see signature). Using FreeNAS 11.3-U2. I have 2 network cards (10Gb Tehuti NIC, and 1Gb Intel motherboard NIC). I would like to do the following:
- Use the 10Gb NIC to just my workstation in my office (sits right next to each other and want fast speeds). Has a fixed address of 10.10.10.10. workstation has fixed address of 10.10.10.11 directly connected.
- Use the 1Gb NIC for everything else ( connect to home router, allow other systems on the home network to access the FreeNAS system). Has fixed address of 10.0.0.250
This all seems to work fine. Get great speeds to the pool from workstation.
Now I want to install a Plex Server in a jail and have it use only the 1Gb network for home access and give it access to FreeNAS servers (for its testing). I're tried a number of times to do this and no success. It gets through 50% install and it says it can't find the DNS server. The 1Gb network has all that configured, but it appears as though it's trying to go through the 10Gb NIC. I'm not an expert on VLANs and bridges. Can someone please help me with this? I'm happy to change the IP addresses if I have to, but I may need to manually configure things and not sure where to start.
thanks in advance, -gh
I recently downsized my home server to save on power to a Gigabyte Z170 system (see signature). Using FreeNAS 11.3-U2. I have 2 network cards (10Gb Tehuti NIC, and 1Gb Intel motherboard NIC). I would like to do the following:
- Use the 10Gb NIC to just my workstation in my office (sits right next to each other and want fast speeds). Has a fixed address of 10.10.10.10. workstation has fixed address of 10.10.10.11 directly connected.
- Use the 1Gb NIC for everything else ( connect to home router, allow other systems on the home network to access the FreeNAS system). Has fixed address of 10.0.0.250
This all seems to work fine. Get great speeds to the pool from workstation.
Now I want to install a Plex Server in a jail and have it use only the 1Gb network for home access and give it access to FreeNAS servers (for its testing). I're tried a number of times to do this and no success. It gets through 50% install and it says it can't find the DNS server. The 1Gb network has all that configured, but it appears as though it's trying to go through the 10Gb NIC. I'm not an expert on VLANs and bridges. Can someone please help me with this? I'm happy to change the IP addresses if I have to, but I may need to manually configure things and not sure where to start.
thanks in advance, -gh