SCSI SENSE Illegal request on write...

[BlueMagician]

Good day all!

I've been greeted with an email from FreeNAS this morning, and wondered if anyone has an idea as to the cause:

Code:

> (da1:mps0:0:1:0): WRITE(16). CDB: 8a 00 00 00 00 02 7a ee 47 00 00 00 00 08 00 00
> (da1:mps0:0:1:0): CAM status: SCSI Status Error
> (da1:mps0:0:1:0): SCSI status: Check Condition
> (da1:mps0:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
> (da1:mps0:0:1:0): Info: 0x27aee4700
> (da1:mps0:0:1:0): Error 22, Unretryable error

ZOOL STATUS shows 1 WRITE error on one of my discs/gptid's - but shows 0kb repaired on scrubs.

SMART tests are passing fine, and the usual suspect counts (reallocated, pending) are showing 0 on all drives.


I have only just rid myself of a different CAM STATUS Error (different port, different drive) by replacing the drive itself on warranty.

I wonder, is it worth updating the firmware on my PERC200 HBA? I'm currently running 20.0.4 but I've heard there's a slightly later revision of 20 that irons out some wrinkles?

Thanks sincerely in advance,
Simon.

 

[Ericloewe]

Yes, P20.00.07 is recommended, but this may have been internal to the drive.