MarioDespot
Dabbler
- Joined
- Jan 20, 2016
- Messages
- 25
Hello,
I'm trying to build serious freeNAS around brand new IBM x3650M4 server with ibm serverRAID M1015 LSI ctrl cross flashed to a LSI9211IT (i use diff versions P15, P17, P20) and hard drives 2.5" 900GB/10K/6Gb sas (IBM FRU 81Y9651).
All HW is ok and tested on different platforms (Linux, VMWare ESXi, .....) but when i install freeNAS i always have same problem (regardless of drivers version, freNAS version ...). FreeNAS have problem recognizing this hard drives.
i tried same configuration ut with sata drives instead sas and worked fine.With any kind of sas or nlsas drives i always have same problem:
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): READ(10). CDB: 28 00 00 00 00 00 00 01 00 00
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): READ(10). CDB: 28 00 00 00 02 00 00 01 00 00
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): READ(10). CDB: 28 00 68 cb 9a 00 00 01 00 00
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): READ(10). CDB: 28 00 68 cb 9c 00 00 01 00 00
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Is it possible that freeNAS cannot recognize IBM branded sas HD-s?
Any suggestion?
Regards
mario
I'm trying to build serious freeNAS around brand new IBM x3650M4 server with ibm serverRAID M1015 LSI ctrl cross flashed to a LSI9211IT (i use diff versions P15, P17, P20) and hard drives 2.5" 900GB/10K/6Gb sas (IBM FRU 81Y9651).
All HW is ok and tested on different platforms (Linux, VMWare ESXi, .....) but when i install freeNAS i always have same problem (regardless of drivers version, freNAS version ...). FreeNAS have problem recognizing this hard drives.
i tried same configuration ut with sata drives instead sas and worked fine.With any kind of sas or nlsas drives i always have same problem:
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): READ(10). CDB: 28 00 00 00 00 00 00 01 00 00
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): READ(10). CDB: 28 00 00 00 02 00 00 01 00 00
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): READ(10). CDB: 28 00 68 cb 9a 00 00 01 00 00
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): READ(10). CDB: 28 00 68 cb 9c 00 00 01 00 00
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): CAM status: SCSI Status Error
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI status: Check Condition
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
Jan 25 02:11:50 freenas (da2:mps0:0:2:0): Error 22, Unretryable error
Is it possible that freeNAS cannot recognize IBM branded sas HD-s?
Any suggestion?
Regards
mario