SOLVED - Question about System -> Alert Services (FreeNAS v11.3-U2)

Hazimil

Contributor

May 11, 2020

Hi

I've been reading up on the Alert Services and have a question regarding it. If an email alert service is configured with the level of Warning, are only Warning alerts sent or are alerts of Warning and higher severity sent? Do I need to create an email alert service one for each severity?

The manual/help page is not clear on this.

Yours
Jonathan

Lurker since 2014, and a FreeNAS user since January 2016. My scripts can be found at: https://github.com/jaburt/

I have created the following resources, and they can be found here:

[HOW TO] Install ClamAV on FreeNAS v12.0-U3.1
Why does editing a FreeNAS script/text file on a Windows PC or Mac (v9 and older) cause issues when copied to NAS?
A script to run rclone on the FreeNAS server to backup NAS data to Backblaze B2 cloud storage.
[HOW TO] Install CrashPlan in an Ubuntu VM on FreeNAS v11 (no longer updated)

OS: FreeNAS v11.3-U4.1 [on 01-August-2020]
CASE & PSU: SuperMicro SuperChassis 745TQ-R920B
MOBO: SuperMicro X10SRi-F
CPU: Intel® Xeon® Processor E5-1650 v4 3.60GHz
CPU HEATSINK: Supermicro 2U Passive CPU Heat Sink Socket LGA2011 Narrow ILM (SNK-P0048PS)
RAM: 4* Supermicro 32GB DDR4 2400MHz ECC (MEM-DR432L-CL02-ER24) [Micron: MTA36ASF4G72PZ-2G3B1]
BOOT DRIVE: Micron M510DC SATA 120GB Enterprise SSD (MTFDDAK120MBP-1AN16ABYY)
DATA DRIVE: 8* WD Red 8TB SATA III harddrives (RaidZ2)
UPS: APC Smart-UPS 1500VA LCD 230V (SMT1500I)
SWITCH: NETGEAR 16-Port Gigabit Ethernet Unmanaged Switch (JGS516)

Jails (iocage): ClamAV, Syncthing, Plex Media Server [PlexPass]
VMs: Windows 10 Pro
Scripts: rclonebackup.sh, plexbackup.sh, email_ups_report.sh, run_clamav_scan.sh

sretalla

Powered by Neutrality

Moderator

May 11, 2020

Warning and up. One is OK.

Aiming to mostly replicate the build from @Stux (with some mods, hopefully around about as good as that link)

4 xSamsung 850 EVO Basic (500GB, 2.5") - - VMs/Jails
1 xASUS Z10PA-D8 (LGA 2011-v3, Intel C612 PCH, ATX) - - Dual socket MoBo
~~2 xWD Green 3D NAND (120GB, 2.5") - - Boot drives (maybe mess around trying out the thread to put swap here too link)~~
1 x Kingston UV400 120GB SSD - boot drive (hit the 3D NAND/TRIM bug with the original WD green selection, failing scrub and showing as corrupted OS files) Decided to go with no mirror and use the config backup script
2 xIntel Xeon E5-2620 v4 (LGA 2011-v3, 2.10GHz) - - 8 core/16 threads per Chip
2 xNoctua NH-U9S (12.50cm)
1 xCorsair HX1200 (1200W) - PSU to support 24 HDD + several SSD and PCI cards
4 xKingston Value RAM (32GB, DDR4-2400, ECC RDIMM 288)
2 xNoctua NF-A8 PWM Premium 80mm PC Computer Case Fan
~~3 xNoctua NF-F12 PWM Cooling Fan~~
3 xNoctua NF-F12 PPC 3000 PWM (120mm) * having noted later in Stux's thread that 1500 RPM is not sufficient to cool the HDDs. Corsair Commander Pro to control the fans (see script and code)
1 xNORCO 4U Rack Mount 24 x Hot-Swappable SATA/SAS 6G Drive Bays Server Rack mount RPC-4224
6 xCableCreation Internal Mini SAS HD Cable, Mini SAS SFF-8643 to Mini SAS 36Pin SFF-8087 Cable
1 xLSI Logic Controller Card 05-25699-00 9305-24i 24-Port SAS 12Gb/s PCI-Express 3.0 Host Bus Adapter
TrueNAS Core 13.0-U6.1
Use existing Drives 8 x10TB WD Red, 8 x4TB WD Purple, + a mix of WD Purple and shucked WD Elements 12TB x 8

ESXi-pfSense-TrueNAS-Docker host

CASE: Fractal Node 804
MB: ASUS x-99M WS
CPU: Xeon E5-2620v4 + Corsair H60 Cooler block
RAM: CRUCIAL 64GB DDR4-2133 ECC RDIMMs
HDD: WD RED 3TBx8
SSD: 4 xSamsung 850 EVO Basic (500GB, 2.5") - - VMs/Jails
HBA: LSI 9300-16i
OS: 1 x Kingston UV400 120GB SSD - boot drive
PSU: Corsair RM1000
Version: TrueNAS CORE 13.0 -U6.1
FANS: 3xFractal R3 120mm - 3 Front, 1 Rear. Corsair Commander Pro to control the fans (see script and code)
CPU FAN: 1xCorsair H60 CPU Radiator - Front
NIC: Intel EXPI9402PTBLK Pro, Dual-Gigabit Adapter (plus the 2 onboard Intel NICs, 1x 210, 1x 218)

VM/Docker host, using ESXi and running pfSense alongside FreeNAS (separate Dual Intel NIC added, dedicated to the pfSense VM)

Other Systems

TrueNAS CORE test system:

CASE: Old Silverstone HTPC case
MB: ASUS x-99M WS
CPU: Xeon E5-2620v4 + Corsair H60 Cooler block
RAM: CRUCIAL 32GB DDR4-2133 ECC RDIMMs
HDD: WD RED 8TBx3
OS: 1 x Kingston UV400 120GB SSD - boot drive
PSU: Corsair RM1000
Version: TrueNAS CORE 13.0-U6.1

SCALE Cluster:

2x Intel NUCs running TrueNAS SCALE 24.04-BETA1
64GB RAM
10th Generation Intel i7
Samsung NVME SSD 1TB, QVO SSD 1TB
Boot from Samsung Portable T7 SSD USBC

CASE: Fractal Define 7 running TrueNAS SCALE 24.04-BETA1
MB: ASUS P10S-I Series
RAM: 32 GB
CPU: Intel(R) Xeon(R) CPU E3-1240L v5 @ 2.10GHz
HDD: 3 WD REDs and a few SSDs
PSU: Fractal ION 2+ 650W

Like my post (or find it helpful)?... Please Like my post over here... -------------------------------------------------------------------------------------->

Hazimil

Contributor

May 11, 2020

Thanks, I thought that might be the case, the manual could do with clarifying it!

J.

Lurker since 2014, and a FreeNAS user since January 2016. My scripts can be found at: https://github.com/jaburt/

I have created the following resources, and they can be found here:

[HOW TO] Install ClamAV on FreeNAS v12.0-U3.1
Why does editing a FreeNAS script/text file on a Windows PC or Mac (v9 and older) cause issues when copied to NAS?
A script to run rclone on the FreeNAS server to backup NAS data to Backblaze B2 cloud storage.
[HOW TO] Install CrashPlan in an Ubuntu VM on FreeNAS v11 (no longer updated)

Important Announcement for the TrueNAS Community.

SOLVED Question about System -> Alert Services (FreeNAS v11.3-U2)

Hazimil

Contributor

sretalla

Powered by Neutrality

Hazimil

Contributor

Similar threads