I installed the latest version on pure hardware, made a pool. It worked, but after a reboot the pool became offline
OS Version:TrueNAS-SCALE-22.02.2.1
Product:X9DRi-LN4+/X9DR3-LN4+
Model:Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz
Memory:63 GiB
I made a command and the pull was restored, but after a reboot it is offline again. What's wrong?
OS Version:TrueNAS-SCALE-22.02.2.1
Product:X9DRi-LN4+/X9DR3-LN4+
Model:Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz
Memory:63 GiB
root@truenas[~]# smartctl --scan
/dev/sda -d scsi # /dev/sda, SCSI device
/dev/sdb -d scsi # /dev/sdb, SCSI device
/dev/sdc -d scsi # /dev/sdc, SCSI device
/dev/sdd -d scsi # /dev/sdd, SCSI device
/dev/sde -d scsi # /dev/sde, SCSI device
/dev/bus/0 -d megaraid,17 # /dev/bus/0 [megaraid_disk_17], SCSI device
/dev/bus/0 -d megaraid,18 # /dev/bus/0 [megaraid_disk_18], SCSI device
/dev/bus/0 -d megaraid,19 # /dev/bus/0 [megaraid_disk_19], SCSI device
/dev/bus/0 -d megaraid,20 # /dev/bus/0 [megaraid_disk_20], SCSI device
root@truenas[~]#
root@truenas[~]# ls /mnt
R10
root@truenas[~]#
root@truenas[~]# zpool status -v
pool: boot-pool
state: ONLINE
status: Some supported and requested features are not enabled on the pool.
The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
config:
NAME STATE READ WRITE CKSUM
boot-pool ONLINE 0 0 0
sde3 ONLINE 0 0 0
errors: No known data errors
root@truenas[~]#
root@truenas[~]# zpool import R10
I made a command and the pull was restored, but after a reboot it is offline again. What's wrong?