knisper64456
Cadet
- Joined
- Feb 23, 2014
- Messages
- 7
hey, i recently had to change my router from a thompson to an ares and since then plex media server went from perfectly functioning to extremely choppy to not playing videos at all anymore. The same happens if i want to manually start videos from the nas hdd.
all the libraries are there, in plex and on the hdd - they just won't play.
what went wrong? i try to update the plex plugin from within the freenas webgui - it does download everything but gets stuck during the "updating plugin" process at 50% for ages.
but i guess there's something else wrong when i can't manually play the files.
the things i changed on my router was setting the channel from 13 (default) to 11 and i changed the pre-shared key with AES only selected. i also renamed the wireless network name and made sure that upnp & dhcp are enabled. Nat mode is "routed with nat".
this is my freenas version: FreeNAS-9.2.1.3-RELEASE-x64 (dc0c46b)
there's also an alert: WARNING: The WebGUI Address could not bind to 192.168.0.15; using wildcard
Please help!
all the libraries are there, in plex and on the hdd - they just won't play.
what went wrong? i try to update the plex plugin from within the freenas webgui - it does download everything but gets stuck during the "updating plugin" process at 50% for ages.
but i guess there's something else wrong when i can't manually play the files.
the things i changed on my router was setting the channel from 13 (default) to 11 and i changed the pre-shared key with AES only selected. i also renamed the wireless network name and made sure that upnp & dhcp are enabled. Nat mode is "routed with nat".
this is my freenas version: FreeNAS-9.2.1.3-RELEASE-x64 (dc0c46b)
there's also an alert: WARNING: The WebGUI Address could not bind to 192.168.0.15; using wildcard
Please help!
Last edited: