Michael Hess
Cadet
- Joined
- Sep 7, 2015
- Messages
- 3
Hope someone can help, here's the situation:
Went on week long trip, had shut down my FreeNAS server, clean shutdown, no issues.
Come home and boot up, get some error about can't find partition, this was after the first FreeNAS boot screen.
Tried Safe mode, kernel halt. Cursed, tried all again. No luck.
Figured drive was bad.
Was running 9.1 (maybe 9.2)
Had backup of config, couldn't find (figures)
Fresh install of 9.3 on different OS drive I had laying around.
Wizard started, told me "Hey buddy, I've got this ZFS store RIGHT here for ya to import!"
Said "Awesome, go for it!"
Got all the right names, ZFS type, etc, far as I could tell.
Duplicated my CIFS setup as I'd had before, wizard was reassuring me greatly!
Wizard completes.
...No volume listed, import volume show NADA
Here's what I do have:
[root@schwartz] ~# camcontrol devlist
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus0 target 0 lun 0 (pass0,ada0)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus1 target 0 lun 0 (pass1,ada1)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus3 target 0 lun 0 (pass2,ada2)
<TOSHIBA MK3263GSXN GC002M> at scbus4 target 0 lun 0 (pass3,ada3)
<Maxtor 6 B200P0 0000> at scbus7 target 0 lun 0 (pass4,da0)
[root@schwartz] ~# gpart show
=> 63 398297025 da0 MBR (189G)
63 398283417 1 linux-data [active] (189G)
398283480 13608 - free - (6.7M)
=> 34 625142381 ada3 GPT (298G)
34 1024 1 bios-boot (512k)
1058 6 - free - (3.0k)
1064 625141344 2 freebsd-zfs (298G)
625142408 7 - free - (3.5k)
[root@schwartz] ~# zpool status
pool: BigDisk
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
scan: none requested
config:
NAME STATE READ WRITE CKSUM
BigDisk ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ada0 ONLINE 0 0 0
ada1 ONLINE 0 0 0
ada2 ONLINE 0 0 0
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
ada3p2 ONLINE 0 0 0
errors: No known data errors
A reboot of the FreeNAS server gets me to the point where I can do the wizard again. Not sure if want to before asking for help...
Thoughts on the viability of my data? I do have a backup, though it's probably a month or so behind, so not looking forward to that quagmire if I can possibly resolve this one.
I did try the original OS drive in another computer, got the same thing, then the drive clicked and died completely, that was fun to hear...
Went on week long trip, had shut down my FreeNAS server, clean shutdown, no issues.
Come home and boot up, get some error about can't find partition, this was after the first FreeNAS boot screen.
Tried Safe mode, kernel halt. Cursed, tried all again. No luck.
Figured drive was bad.
Was running 9.1 (maybe 9.2)
Had backup of config, couldn't find (figures)
Fresh install of 9.3 on different OS drive I had laying around.
Wizard started, told me "Hey buddy, I've got this ZFS store RIGHT here for ya to import!"
Said "Awesome, go for it!"
Got all the right names, ZFS type, etc, far as I could tell.
Duplicated my CIFS setup as I'd had before, wizard was reassuring me greatly!
Wizard completes.
...No volume listed, import volume show NADA
Here's what I do have:
[root@schwartz] ~# camcontrol devlist
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus0 target 0 lun 0 (pass0,ada0)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus1 target 0 lun 0 (pass1,ada1)
<WDC WD30EFRX-68EUZN0 82.00A82> at scbus3 target 0 lun 0 (pass2,ada2)
<TOSHIBA MK3263GSXN GC002M> at scbus4 target 0 lun 0 (pass3,ada3)
<Maxtor 6 B200P0 0000> at scbus7 target 0 lun 0 (pass4,da0)
[root@schwartz] ~# gpart show
=> 63 398297025 da0 MBR (189G)
63 398283417 1 linux-data [active] (189G)
398283480 13608 - free - (6.7M)
=> 34 625142381 ada3 GPT (298G)
34 1024 1 bios-boot (512k)
1058 6 - free - (3.0k)
1064 625141344 2 freebsd-zfs (298G)
625142408 7 - free - (3.5k)
[root@schwartz] ~# zpool status
pool: BigDisk
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
scan: none requested
config:
NAME STATE READ WRITE CKSUM
BigDisk ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ada0 ONLINE 0 0 0
ada1 ONLINE 0 0 0
ada2 ONLINE 0 0 0
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
ada3p2 ONLINE 0 0 0
errors: No known data errors
A reboot of the FreeNAS server gets me to the point where I can do the wizard again. Not sure if want to before asking for help...
Thoughts on the viability of my data? I do have a backup, though it's probably a month or so behind, so not looking forward to that quagmire if I can possibly resolve this one.
I did try the original OS drive in another computer, got the same thing, then the drive clicked and died completely, that was fun to hear...