After getting a little fed up with running zfs as a module over in linux-land, I upgraded to TrueNAS Core using the same hardware. I have no previous experience with freebsd/freenas/truenas. I appreciate how mostly turn-key the OS is.
It's been a couple months of usage, and I'm noticing very infrequent errors on the console.
The error occurs like clockwork on the same day of the week (sunday) but this is neither the day my smart tests are scheduled nor the day the scrub is scheduled.
I'm running a pair of these old WD red drives and a similarly-sized seagate ST3000DM001.
I've not noticed any actual issues with the performance of the NAS since switching from Linux, and I hadn't found any errors in smartctl before this reinstallation. I haven't seen any obvious red flags on the dashboard as well. I'm also a bit of a novice as I haven't had any issues with the hardware over the past years so I'm not too certain what this error means. I'm inclined to think it's matching a scheduled task of some kind, but as I said before the tasks occur on a different day from the smart test and scrub schedules.
It's been a couple months of usage, and I'm noticing very infrequent errors on the console.
Code:
Feb 4 00:00:00 truenas syslog-ng[1311]: Configuration reload finished; Feb 4 22:33:07 truenas (ada2:ahcich4:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 28 48 32 a3 40 c3 00 00 00 00 00 Feb 4 22:33:07 truenas (ada2:ahcich4:0:0:0): CAM status: ATA Status Error Feb 4 22:33:07 truenas (ada2:ahcich4:0:0:0): ATA status: 41 (DRDY ERR), error: 10 (IDNF ) Feb 4 22:33:07 truenas (ada2:ahcich4:0:0:0): RES: 41 10 48 32 a3 40 c3 00 00 00 00 Feb 4 22:33:07 truenas (ada2:ahcich4:0:0:0): Retrying command, 3 more tries remain
The error occurs like clockwork on the same day of the week (sunday) but this is neither the day my smart tests are scheduled nor the day the scrub is scheduled.
I'm running a pair of these old WD red drives and a similarly-sized seagate ST3000DM001.
I've not noticed any actual issues with the performance of the NAS since switching from Linux, and I hadn't found any errors in smartctl before this reinstallation. I haven't seen any obvious red flags on the dashboard as well. I'm also a bit of a novice as I haven't had any issues with the hardware over the past years so I'm not too certain what this error means. I'm inclined to think it's matching a scheduled task of some kind, but as I said before the tasks occur on a different day from the smart test and scrub schedules.
Code:
root@truenas[~]# smartctl -x /dev/ada2
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD30EFRX-68EUZN0
Serial Number: WD-WMC4N1013948
LU WWN Device Id: 5 0014ee 0590502c9
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Feb 10 18:05:19 2024 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 411) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 179 175 021 - 6008
4 Start_Stop_Count -O--CK 100 100 000 - 91
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 057 057 000 - 31919
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 91
192 Power-Off_Retract_Count -O--CK 200 200 000 - 19
193 Load_Cycle_Count -O--CK 121 121 000 - 239316
194 Temperature_Celsius -O---K 131 119 000 - 19
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 3
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 [2] occurred at disk power-on lifetime: 31779 hours (1324 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 c3 a3 32 48 40 00 Error: IDNF at LBA = 0xc3a33248 = 3282252360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 28 00 00 00 00 c3 a3 32 48 40 08 27d+15:03:48.560 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 27d+15:02:49.142 FLUSH CACHE EXT
61 00 08 00 f0 00 01 5d 50 a1 c0 40 08 27d+15:02:49.141 WRITE FPDMA QUEUED
61 00 08 00 e8 00 01 5d 50 9f c0 40 08 27d+15:02:49.141 WRITE FPDMA QUEUED
61 00 08 00 e0 00 00 00 40 03 c0 40 08 27d+15:02:49.141 WRITE FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 31430 hours (1309 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 74 ed af d8 40 00 Error: IDNF at LBA = 0x74edafd8 = 1961734104
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 88 00 00 74 ed af d8 40 08 13d+01:41:02.649 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 13d+01:40:02.978 FLUSH CACHE EXT
61 00 08 00 78 00 01 5d 50 a2 10 40 08 13d+01:40:02.977 WRITE FPDMA QUEUED
61 00 08 00 70 00 01 5d 50 a0 10 40 08 13d+01:40:02.977 WRITE FPDMA QUEUED
61 00 08 00 68 00 00 00 40 04 10 40 08 13d+01:40:02.977 WRITE FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 31263 hours (1302 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 64 92 91 28 40 00 Error: IDNF at LBA = 0x64929128 = 1687327016
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 68 00 68 00 00 64 92 91 28 40 08 6d+02:17:41.723 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 08 6d+02:17:32.553 FLUSH CACHE EXT
61 00 08 00 58 00 01 5d 50 a1 e8 40 08 6d+02:17:32.552 WRITE FPDMA QUEUED
61 00 08 00 50 00 01 5d 50 9f e8 40 08 6d+02:17:32.552 WRITE FPDMA QUEUED
61 00 08 00 48 00 00 00 40 03 e8 40 08 6d+02:17:32.552 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 31784 -
# 2 Short offline Completed without error 00% 31616 -
# 3 Short offline Completed without error 00% 31449 -
# 4 Short offline Completed without error 00% 31281 -
# 5 Short offline Completed without error 00% 31113 -
# 6 Short offline Completed without error 00% 30945 -
# 7 Short offline Completed without error 00% 30777 -
# 8 Short offline Completed without error 00% 30609 -
# 9 Short offline Completed without error 00% 30441 -
#10 Short offline Completed without error 00% 30273 -
#11 Short offline Completed without error 00% 30106 -
#12 Short offline Completed without error 00% 29938 -
#13 Extended offline Completed without error 00% 19 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 19 Celsius
Power Cycle Min/Max Temperature: 17/24 Celsius
Lifetime Min/Max Temperature: 12/31 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (3)
Index Estimated Time Temperature Celsius
4 2024-02-10 10:08 19 -
... ..(318 skipped). .. -
323 2024-02-10 15:27 19 -
324 2024-02-10 15:28 20 *
325 2024-02-10 15:29 19 -
... ..( 2 skipped). .. -
328 2024-02-10 15:32 19 -
329 2024-02-10 15:33 20 *
330 2024-02-10 15:34 19 -
... ..( 2 skipped). .. -
333 2024-02-10 15:37 19 -
334 2024-02-10 15:38 20 *
335 2024-02-10 15:39 19 -
336 2024-02-10 15:40 19 -
337 2024-02-10 15:41 20 *
338 2024-02-10 15:42 19 -
339 2024-02-10 15:43 20 *
340 2024-02-10 15:44 19 -
341 2024-02-10 15:45 19 -
342 2024-02-10 15:46 20 *
343 2024-02-10 15:47 19 -
344 2024-02-10 15:48 20 *
345 2024-02-10 15:49 19 -
346 2024-02-10 15:50 19 -
347 2024-02-10 15:51 20 *
348 2024-02-10 15:52 19 -
349 2024-02-10 15:53 20 *
350 2024-02-10 15:54 19 -
... ..( 2 skipped). .. -
353 2024-02-10 15:57 19 -
354 2024-02-10 15:58 20 *
355 2024-02-10 15:59 19 -
356 2024-02-10 16:00 19 -
357 2024-02-10 16:01 20 *
358 2024-02-10 16:02 19 -
359 2024-02-10 16:03 20 *
360 2024-02-10 16:04 19 -
361 2024-02-10 16:05 19 -
362 2024-02-10 16:06 20 *
363 2024-02-10 16:07 19 -
364 2024-02-10 16:08 20 *
365 2024-02-10 16:09 19 -
366 2024-02-10 16:10 19 -
367 2024-02-10 16:11 20 *
368 2024-02-10 16:12 19 -
369 2024-02-10 16:13 20 *
370 2024-02-10 16:14 19 -
371 2024-02-10 16:15 19 -
372 2024-02-10 16:16 20 *
373 2024-02-10 16:17 19 -
374 2024-02-10 16:18 20 *
375 2024-02-10 16:19 19 -
376 2024-02-10 16:20 19 -
377 2024-02-10 16:21 20 *
378 2024-02-10 16:22 19 -
379 2024-02-10 16:23 20 *
380 2024-02-10 16:24 19 -
381 2024-02-10 16:25 19 -
382 2024-02-10 16:26 20 *
383 2024-02-10 16:27 19 -
384 2024-02-10 16:28 20 *
385 2024-02-10 16:29 19 -
386 2024-02-10 16:30 19 -
387 2024-02-10 16:31 20 *
388 2024-02-10 16:32 19 -
389 2024-02-10 16:33 20 *
390 2024-02-10 16:34 19 -
391 2024-02-10 16:35 19 -
392 2024-02-10 16:36 20 *
393 2024-02-10 16:37 19 -
... ..( 2 skipped). .. -
396 2024-02-10 16:40 19 -
397 2024-02-10 16:41 20 *
398 2024-02-10 16:42 19 -
... ..( 2 skipped). .. -
401 2024-02-10 16:45 19 -
402 2024-02-10 16:46 20 *
403 2024-02-10 16:47 19 -
404 2024-02-10 16:48 20 *
405 2024-02-10 16:49 19 -
406 2024-02-10 16:50 20 *
407 2024-02-10 16:51 20 *
408 2024-02-10 16:52 19 -
... ..( 7 skipped). .. -
416 2024-02-10 17:00 19 -
417 2024-02-10 17:01 20 *
418 2024-02-10 17:02 19 -
419 2024-02-10 17:03 20 *
420 2024-02-10 17:04 19 -
421 2024-02-10 17:05 20 *
422 2024-02-10 17:06 20 *
423 2024-02-10 17:07 19 -
424 2024-02-10 17:08 19 -
425 2024-02-10 17:09 20 *
426 2024-02-10 17:10 20 *
427 2024-02-10 17:11 20 *
428 2024-02-10 17:12 19 -
429 2024-02-10 17:13 19 -
430 2024-02-10 17:14 20 *
431 2024-02-10 17:15 19 -
... ..( 3 skipped). .. -
435 2024-02-10 17:19 19 -
436 2024-02-10 17:20 20 *
437 2024-02-10 17:21 20 *
438 2024-02-10 17:22 19 -
439 2024-02-10 17:23 19 -
440 2024-02-10 17:24 19 -
441 2024-02-10 17:25 20 *
442 2024-02-10 17:26 19 -
443 2024-02-10 17:27 19 -
444 2024-02-10 17:28 19 -
445 2024-02-10 17:29 20 *
446 2024-02-10 17:30 20 *
447 2024-02-10 17:31 20 *
448 2024-02-10 17:32 19 -
449 2024-02-10 17:33 19 -
450 2024-02-10 17:34 20 *
451 2024-02-10 17:35 20 *
452 2024-02-10 17:36 20 *
453 2024-02-10 17:37 19 -
... ..( 2 skipped). .. -
456 2024-02-10 17:40 19 -
457 2024-02-10 17:41 20 *
458 2024-02-10 17:42 19 -
... ..( 2 skipped). .. -
461 2024-02-10 17:45 19 -
462 2024-02-10 17:46 20 *
463 2024-02-10 17:47 19 -
... ..( 17 skipped). .. -
3 2024-02-10 18:05 19 -
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 7183850 Vendor specific
