Newb: Will this scrub ever complete...?

[smartin80]

Hi,

I'm doing my first scrub since adding some data to my pool...

So far it's taken 36h, says it's got 520000 secs to go and climbing relentlessly. It's not a powerful box but I only have 6TB storage with about 50% free.

Is it taking too long? Something wrong?

S

 

[Patrick M. Hausen]

Please post the output of zpool status -v and the content of the file /var/run/dmesg.boot.

 

[smartin80]

Please post the output of zpool status -v and the content of the file /var/run/dmesg.boot.

Please post the output of zpool status -v and the content of the file /var/run/dmesg.boot.

Patrick,

I'm getting:

root@freenas[~]# zpool status -v
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0 days 00:00:11 with 0 errors on Wed Jun 10 03:45:11 2020
config:

NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
ada4p2 ONLINE 0 0 0

errors: No known data errors

pool: zulu
state: ONLINE
scan: scrub in progress since Sat Jun 13 09:41:42 2020
560G scanned at 4.80M/s, 183G issued at 1.57M/s, 3.10T total
0 repaired, 5.77% done, no estimated completion time
config:

NAME STATE READ WRITE CKSUM
zulu ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gptid/18e1458f-a4e8-11ea-9a8c-e4115b12bb27 ONLINE 0 0 0
gptid/18c91f78-a4e8-11ea-9a8c-e4115b12bb27 ONLINE 0 0 0
gptid/18d6efcc-a4e8-11ea-9

Can't get to /var/run/dmesg.boot at the moment... Getting login key error. Will take me some time to figure out! :)

S

 

[Patrick M. Hausen]

How did you get the zpool status -v then? Just enter cat /var/run/dmesg.boot at the same command line prompt. Then copy & paste.
N.B. Please use code blocks for that.

 

[smartin80]

Please post the output of zpool status -v and the content of the file /var/run/dmesg.boot.

Didn't realise Nano was built in to Freenas... :)

This is /var/run/dmesg.boot

Copyright (c) 1992-2019 The FreeBSD Project.Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-RELEASE-p9 #0 r325575+588899735f7(HEAD): Mon Jun 1 15:04:31 EDT 2>
root@mp20.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/>
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.>
VT(vga): text 80x25
CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100f63 Family=0x10 Model=0x6 Stepping=3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow>
AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR

 

[Patrick M. Hausen]

Not just the top 20 lines, all of it. Please use cat instead of nano ... and put that into a code block. Please .. did you even read what I wrote?

And add the output of gpart list - thanks.

 

[smartin80]

Not just the top 20 lines, all of it. Please use cat instead of nano ... and put that into a code block. Please .. did you even read what I wrote?

And add the output of gpart list - thanks.

Our messages crossed...

Too many characters. Have to split it up...

Code:

root@freenas[~]# cat /var/run/dmesg.boot

Copyright (c) 1992-2019 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 11.3-RELEASE-p9 #0 r325575+588899735f7(HEAD): Mon Jun  1 15:04:31 EDT 2020

    root@mp20.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64

FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)

VT(vga): text 80x25

CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)

  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3

  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

  Features2=0x802009<SSE3,MON,CX16,POPCNT>

  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>

  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>

  SVM: NP,NRIP,NAsids=64

  TSC: P-state invariant

real memory  = 8589934592 (8192 MB)

avail memory = 8251179008 (7868 MB)

Event timer "LAPIC" quality 100

ACPI APIC Table: <HP     ProLiant>

FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs

FreeBSD/SMP: 1 package(s) x 2 core(s)

WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.

Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20171214/tbfadt-748)

ioapic0 <Version 2.1> irqs 0-23 on motherboard

SMP: AP CPU #1 Launched!

Timecounter "TSC" frequency 1497542005 Hz quality 800

random: entropy device external interface

kbd1 at kbdmux0

mlx5en: Mellanox Ethernet driver 3.5.1 (April 2019)

nexus0

vtvga0: <VT VGA driver> on motherboard

cryptosoft0: <software crypto> on motherboard

aesni0: No AESNI support.

padlock0: No ACE support.

acpi0: <HP ProLiant> on motherboard

acpi0: Power Button (fixed)

cpu0: <ACPI CPU> on acpi0

cpu1: <ACPI CPU> on acpi0

attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0

Timecounter "i8254" frequency 1193182 Hz quality 0

Event timer "i8254" frequency 1193182 Hz quality 100

atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0

atrtc0: registered as a time-of-day clock, resolution 1.000000s

Event timer "RTC" frequency 32768 Hz quality 0

hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0

Timecounter "HPET" frequency 14318180 Hz quality 950

Event timer "HPET" frequency 14318180 Hz quality 550

Event timer "HPET1" frequency 14318180 Hz quality 450

Timecounter "ACPI-safe" frequency 3579545 Hz quality 850

acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0

pcib0: _OSC returned error 0x10

pci0: <ACPI PCI bus> on pcib0

pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0

pci1: <ACPI PCI bus> on pcib1

vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfe7e0000-0xfe7fffff irq 18 at device 0.0 on pci1

vgapci0: Boot video device

pci1: <multimedia, HDA> at device 0.1 (no driver attached)

pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0

pci2: <ACPI PCI bus> on pcib2

pci2: <network> at device 0.0 (no driver attached)

pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0

pci3: <ACPI PCI bus> on pcib3

bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci3

bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E

miibus0: <MII bus> on bge0

brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0

brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow

bge0: Using defaults for TSO: 65518/35/2048

bge0: Ethernet address: e4:11:5b:12:bb:27

ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe6ffc00-0xfe6fffff irq 19at device 17.0 on pci0

ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported

ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>

ahcich0: <AHCI channel> at channel 0 on ahci0

ahcich1: <AHCI channel> at channel 1 on ahci0

ahcich2: <AHCI channel> at channel 2 on ahci0

ahcich3: <AHCI channel> at channel 3 on ahci0

ahcich4: <AHCI channel> at channel 4 on ahci0

ahcich5: <AHCI channel> at channel 5 on ahci0

 

[smartin80]

Code:

ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fe000-0xfe6fefff irq 18 at device 18.0 on pci0

usbus0 on ohci0

usbus0: 12Mbps Full Speed USB v1.0

ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff800-0xfe6ff8ff irq17 at device 18.2 on pci0

usbus1: EHCI version 1.0

usbus1 on ehci0

usbus1: 480Mbps High Speed USB v2.0

ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fd000-0xfe6fdfff irq 18 at device 19.0 on pci0

usbus2 on ohci1

usbus2: 12Mbps Full Speed USB v1.0

ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff400-0xfe6ff4ff irq17 at device 19.2 on pci0

usbus3: EHCI version 1.0

usbus3 on ehci1

usbus3: 480Mbps High Speed USB v2.0

isab0: <PCI-ISA bridge> at device 20.3 on pci0

isa0: <ISA bus> on isab0

pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0

pci4: <ACPI PCI bus> on pcib4

ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fc000-0xfe6fcfff irq 18 at device 22.0 on pci0

usbus4 on ohci2

usbus4: 12Mbps Full Speed USB v1.0

ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff000-0xfe6ff0ff irq17 at device 22.2 on pci0

usbus5: EHCI version 1.0

usbus5 on ehci2

usbus5: 480Mbps High Speed USB v2.0

amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4

acpi_button0: <Power Button> on acpi0

ipmi0: <IPMI System Interface> on isa0

ipmi0: KCS mode found at mem 0x0 alignment 0x1 on isa

ipmi0: couldn't configure I/O resource

device_attach: ipmi0 attach returned 6

ipmi0: <IPMI System Interface> at iomem 0-0x1 on isa0

ipmi0: KCS mode found at mem 0x0 alignment 0x1 on isa

ipmi0: couldn't configure I/O resource

device_attach: ipmi0 attach returned 6

amdsbwd0: <AMD SB8xx/SB9xx/Axx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0

hwpstate0: <Cool`n'Quiet 2.0> on cpu0

ZFS filesystem version: 5

ZFS storage pool version: features support (5000)

Timecounters tick every 1.000 msec

freenas_sysctl: adding account.

freenas_sysctl: adding directoryservice.

freenas_sysctl: adding middlewared.

freenas_sysctl: adding network.

freenas_sysctl: adding services.

ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled

ugen4.1: <ATI OHCI root HUB> at usbus4

ugen5.1: <ATI EHCI root HUB> at usbus5

uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4

uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5

ugen3.1: <ATI EHCI root HUB> at usbus3

ugen2.1: <ATI OHCI root HUB> at usbus2

uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3

uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2

ugen1.1: <ATI EHCI root HUB> at usbus1

ugen0.1: <ATI OHCI root HUB> at usbus0

uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1

uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0

bge0: link state changed to DOWN

uhub0: 4 ports with 4 removable, self powered

uhub3: 5 ports with 5 removable, self powered

uhub5: 5 ports with 5 removable, self powered

uhub1: 4 ports with 4 removable, self powered

uhub4: 5 ports with 5 removable, self powered

uhub2: 5 ports with 5 removable, self powered

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0

ada0: <WDC WD20EARS-00MVWB0 51.0AB51> ATA8-ACS SATA 2.x device

ada0: Serial Number WD-WMAZA3347277

ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada0: Command Queueing enabled

ada0: 1907729MB (3907029168 512 byte sectors)

ada0: quirks=0x1<4K>

ada1 at ahcich1 bus 0 scbus1 target 0 lun 0

ada1: <SAMSUNG HD204UI 1AQ10001> ATA8-ACS SATA 2.x device

ada1: Serial Number S2H7JD1B209317

ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada1: Command Queueing enabled

ada1: 1907729MB (3907029168 512 byte sectors)

ada1: quirks=0x1<4K>

ada2 at ahcich2 bus 0 scbus2 target 0 lun 0

ada2: <ST2000VN000-1H3164 SC42> ACS-2 ATA SATA 3.x device

ada2: Serial Number W1H1PAHL

ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada2: Command Queueing enabled

ada2: 1907729MB (3907029168 512 byte sectors)

ada3 at ahcich3 bus 0 scbus3 target 0 lun 0

ada3: <Hitachi HDS723020BLA642 MN6OA180> ATA8-ACS SATA 3.x device

ada3: Serial Number MN1221F301K7HA

ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada3: Command Queueing enabled

ada3: 1907729MB (3907029168 512 byte sectors)

ada4 at ahcich5 bus 0 scbus5 target 0 lun 0

ada4: <CT120BX500SSD1 M6CR013> ACS-2 ATA SATA 3.x device

ada4: Serial Number 2015E3F6B513

ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)

ada4: Command Queueing enabled

ada4: 114473MB (234441648 512 byte sectors)

random: unblocking device.

Trying to mount root from zfs:freenas-boot/ROOT/11.3-U3.2 []...

lo0: link state changed to UP

pmc: Unknown AMD64 CPU.

pmc: Unknown AMD CPU.

hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>

GEOM_MIRROR: Device mirror/swap0 launched (2/2).

GEOM_MIRROR: Device mirror/swap1 launched (2/2).

GEOM_ELI: Device mirror/swap0.eli created.

GEOM_ELI: Encryption: AES-XTS 128

GEOM_ELI:     Crypto: software

GEOM_ELI: Device mirror/swap1.eli created.

GEOM_ELI: Encryption: AES-XTS 128

GEOM_ELI:     Crypto: software

bge0: link state changed to UP

CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)

  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3

  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

  Features2=0x802009<SSE3,MON,CX16,POPCNT>

  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>

  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>

  SVM: NP,NRIP,NAsids=64

  TSC: P-state invariant

pid 903 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped)

ahcich2: Timeout on slot 13 port 0

ahcich2: is 00000000 cs 00002000 ss 00000000 rs 00002000 tfd c0 serr 00000000 cmd 0020ed17

(ada2:ahcich2:0:0:0): FLUSHCACHE48. ACB: ea 00 00 00 00 40 00 00 00 00 00 00

(ada2:ahcich2:0:0:0): CAM status: Command timeout

(ada2:ahcich2:0:0:0): Retrying command

ahcich2: Timeout on slot 6 port 0

ahcich2: is 00000000 cs 00000000 ss 000002e0 rs 000002e0 tfd 40 serr 00000000 cmd 0020e917

(ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 58 98 8b 4d 40 9e 00 00 00 00 00

(ada2:ahcich2:0:0:0): CAM status: Command timeout

(ada2:ahcich2:0:0:0): Retrying command

ahcich2: AHCI reset: device not ready after 31000ms (tfd = 00000080)

ahcich2: Timeout on slot 10 port 0

ahcich2: is 00000000 cs 00000400 ss 00000000 rs 00000400 tfd 00 serr 00000000 cmd 0020ea17

(aprobe0:ahcich2:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): CAM status: Command timeout

(aprobe0:ahcich2:0:0:0): Retrying command

ahcich2: AHCI reset: device not ready after 31000ms (tfd = 00000080)

ahcich2: Timeout on slot 11 port 0

ahcich2: is 00000000 cs 00000800 ss 00000000 rs 00000800 tfd 00 serr 00000000 cmd 0020eb17

(aprobe0:ahcich2:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): CAM status: Command timeout

(aprobe0:ahcich2:0:0:0): Error 5, Retries exhausted

ahcich2: AHCI reset: device not ready after 31000ms (tfd = 00000080)

ahcich2: Timeout on slot 12 port 0

ahcich2: is 00000000 cs 00001000 ss 00000000 rs 00001000 tfd 00 serr 00000000 cmd 0020ec17

(aprobe0:ahcich2:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): CAM status: Command timeout

(aprobe0:ahcich2:0:0:0): Error 5, Retry was blocked

ada2 at ahcich2 bus 0 scbus2 target 0 lun 0

ada2: <ST2000VN000-1H3164 SC42> s/n W1H1PAHL detached

ahcich2: AHCI reset: device not ready after 31000ms (tfd = 00000080)

ahcich2: Timeout on slot 13 port 0

ahcich2: is 00000000 cs 00002000 ss 00000000 rs 00002000 tfd 00 serr 00000000 cmd 0020ed17

(aprobe0:ahcich2:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): CAM status: Command timeout

(aprobe0:ahcich2:0:0:0): Retrying command

ahcich2: AHCI reset: device not ready after 31000ms (tfd = 00000080)

ahcich2: Timeout on slot 14 port 0

ahcich2: is 00000000 cs 00004000 ss 00000000 rs 00004000 tfd 00 serr 00000000 cmd 0020ee17

(aprobe0:ahcich2:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): CAM status: Command timeout

(aprobe0:ahcich2:0:0:0): Error 5, Retries exhausted

ahcich2: AHCI reset: device not ready after 31000ms (tfd = 00000080)

ahcich2: Poll timeout on slot 15 port 0

ahcich2: is 00000000 cs 00008000 ss 00000000 rs 00008000 tfd 00 serr 00000000 cmd 0020ef17

(aprobe0:ahcich2:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): CAM status: Command timeout

(aprobe0:ahcich2:0:0:0): Error 5, Retries exhausted

ahcich2: Timeout on slot 16 port 0

ahcich2: is 00000000 cs 00010000 ss 00000000 rs 00010000 tfd 00 serr 00000000 cmd 0020f017

(ada2:ahcich2:0:0:0): SETFEATURES ENABLE RCACHE. ACB: ef aa 00 00 00 40 00 00 00 00 00 00

(ada2:ahcich2:0:0:0): CAM status: Unconditionally Re-queue Request

(ada2:ahcich2:0:0:0): Error 5, Periph was invalidated

GEOM_MIRROR: Device swap0: provider ada2p1 disconnected.

g_access(952): provider gptid/18e1458f-a4e8-11ea-9a8c-e4115b12bb27 has error 6 set

g_access(952): provider ada2 has error 6 set

(ada2:ahcich2:0:0:0): Periph destroyed

ada2 at ahcich2 bus 0 scbus2 target 0 lun 0

ada2: <ST2000VN000-1H3164 SC42> ACS-2 ATA SATA 3.x device

ada2: Serial Number W1H1PAHL

ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada2: Command Queueing enabled

ada2: 1907729MB (3907029168 512 byte sectors)

GEOM_ELI: Device mirror/swap0.eli destroyed.

GEOM_MIRROR: Device swap0: provider destroyed.

GEOM_MIRROR: Device swap0 destroyed.

GEOM_MIRROR: Device mirror/swap0 launched (2/2).

GEOM_ELI: Device mirror/swap0.eli created.

GEOM_ELI: Encryption: AES-XTS 128

GEOM_ELI:     Crypto: software

ahcich2: Timeout on slot 14 port 0

ahcich2: is 00000000 cs 00004000 ss 00000000 rs 00004000 tfd c0 serr 00000000 cmd 0020ee17

(ada2:ahcich2:0:0:0): FLUSHCACHE48. ACB: ea 00 00 00 00 40 00 00 00 00 00 00

(ada2:ahcich2:0:0:0): CAM status: Command timeout

(ada2:ahcich2:0:0:0): Retrying command

ahcich2: AHCI reset: device not ready after 31000ms (tfd = 00000080)

ahcich2: Timeout on slot 15 port 0

ahcich2: is 00000000 cs 00008000 ss 00000000 rs 00008000 tfd 00 serr 00000000 cmd 0020ef17

(aprobe0:ahcich2:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): CAM status: Command timeout

(aprobe0:ahcich2:0:0:0): Retrying command

ahcich2: AHCI reset: device not ready after 31000ms (tfd = 00000080)

ahcich2: Timeout on slot 21 port 0

ahcich2: is 00000000 cs 00200000 ss 00000000 rs 00200000 tfd c0 serr 00000000 cmd 0020f517

(ada2:ahcich2:0:0:0): FLUSHCACHE48. ACB: ea 00 00 00 00 40 00 00 00 00 00 00

(ada2:ahcich2:0:0:0): CAM status: Command timeout

(ada2:ahcich2:0:0:0): Retrying command

pid 2053 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped)

Waiting (max 60 seconds) for system process `vnlru' to stop... done

Waiting (max 60 seconds) for system process `bufdaemon' to stop... done

Waiting (max 60 seconds) for system process `syncer' to stop...

Syncing disks, vnodes remaining... 0 0 0 0 done

All buffers synced.

GEOM_ELI: Device mirror/swap1.eli destroyed.

GEOM_ELI: Detached mirror/swap1.eli on last close.

GEOM_ELI: Device mirror/swap0.eli destroyed.

GEOM_ELI: Detached mirror/swap0.eli on last close.

Uptime: 14h16m15s

GEOM_MIRROR: Device swap0: provider destroyed.

GEOM_MIRROR: Device swap0 destroyed.

GEOM_MIRROR: Device swap1: provider destroyed.

GEOM_MIRROR: Device swap1 destroyed.

Copyright (c) 1992-2019 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 11.3-RELEASE-p9 #0 r325575+588899735f7(HEAD): Mon Jun  1 15:04:31 EDT 2020

    root@mp20.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64

FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)

VT(vga): text 80x25

CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)

  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3

  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

  Features2=0x802009<SSE3,MON,CX16,POPCNT>

  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>

  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>

  SVM: NP,NRIP,NAsids=64

  TSC: P-state invariant

real memory  = 8589934592 (8192 MB)

avail memory = 8251179008 (7868 MB)

Event timer "LAPIC" quality 100

ACPI APIC Table: <HP     ProLiant>

FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs

FreeBSD/SMP: 1 package(s) x 2 core(s)

WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.

Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20171214/tbfadt-748)

ioapic0 <Version 2.1> irqs 0-23 on motherboard

SMP: AP CPU #1 Launched!

Timecounter "TSC" frequency 1497536017 Hz quality 800

random: entropy device external interface

kbd1 at kbdmux0

mlx5en: Mellanox Ethernet driver 3.5.1 (April 2019)

nexus0

vtvga0: <VT VGA driver> on motherboard

cryptosoft0: <software crypto> on motherboard

aesni0: No AESNI support.

padlock0: No ACE support.

acpi0: <HP ProLiant> on motherboard

acpi0: Power Button (fixed)

cpu0: <ACPI CPU> on acpi0

cpu1: <ACPI CPU> on acpi0

attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0

Timecounter "i8254" frequency 1193182 Hz quality 0

Event timer "i8254" frequency 1193182 Hz quality 100

atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0

atrtc0: registered as a time-of-day clock, resolution 1.000000s

Event timer "RTC" frequency 32768 Hz quality 0

hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0

Timecounter "HPET" frequency 14318180 Hz quality 950

Event timer "HPET" frequency 14318180 Hz quality 550

Event timer "HPET1" frequency 14318180 Hz quality 450

Timecounter "ACPI-safe" frequency 3579545 Hz quality 850

acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0

pcib0: _OSC returned error 0x10

pci0: <ACPI PCI bus> on pcib0

pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0

pci1: <ACPI PCI bus> on pcib1

vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfe7e0000-0xfe7fffff irq 18 at device 0.0 on pci1

vgapci0: Boot video device

pci1: <multimedia, HDA> at device 0.1 (no driver attached)

pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0

pci2: <ACPI PCI bus> on pcib2

pci2: <network> at device 0.0 (no driver attached)

pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0

pci3: <ACPI PCI bus> on pcib3

bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci3

bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E

miibus0: <MII bus> on bge0

brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0

brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow

bge0: Using defaults for TSO: 65518/35/2048

bge0: Ethernet address: e4:11:5b:12:bb:27

ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe6ffc00-0xfe6fffff irq 19at device 17.0 on pci0

ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported

ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>

ahcich0: <AHCI channel> at channel 0 on ahci0

ahcich1: <AHCI channel> at channel 1 on ahci0

ahcich2: <AHCI channel> at channel 2 on ahci0

ahcich3: <AHCI channel> at channel 3 on ahci0

ahcich4: <AHCI channel> at channel 4 on ahci0

ahcich5: <AHCI channel> at channel 5 on ahci0

ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fe000-0xfe6fefff irq 18 at device 18.0 on pci0

usbus0 on ohci0

usbus0: 12Mbps Full Speed USB v1.0

ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff800-0xfe6ff8ff irq17 at device 18.2 on pci0

usbus1: EHCI version 1.0

usbus1 on ehci0

usbus1: 480Mbps High Speed USB v2.0

ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fd000-0xfe6fdfff irq 18 at device 19.0 on pci0

usbus2 on ohci1

usbus2: 12Mbps Full Speed USB v1.0

ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff400-0xfe6ff4ff irq17 at device 19.2 on pci0

usbus3: EHCI version 1.0

usbus3 on ehci1

usbus3: 480Mbps High Speed USB v2.0

isab0: <PCI-ISA bridge> at device 20.3 on pci0

isa0: <ISA bus> on isab0

pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0

pci4: <ACPI PCI bus> on pcib4

ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fc000-0xfe6fcfff irq 18 at device 22.0 on pci0

usbus4 on ohci2

usbus4: 12Mbps Full Speed USB v1.0

ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff000-0xfe6ff0ff irq17 at device 22.2 on pci0

usbus5: EHCI version 1.0

usbus5 on ehci2

usbus5: 480Mbps High Speed USB v2.0

amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4

acpi_button0: <Power Button> on acpi0

ipmi0: <IPMI System Interface> on isa0

ipmi0: KCS mode found at mem 0x0 alignment 0x1 on isa

ipmi0: couldn't configure I/O resource

device_attach: ipmi0 attach returned 6

ipmi0: <IPMI System Interface> at iomem 0-0x1 on isa0

ipmi0: KCS mode found at mem 0x0 alignment 0x1 on isa

ipmi0: couldn't configure I/O resource

device_attach: ipmi0 attach returned 6

amdsbwd0: <AMD SB8xx/SB9xx/Axx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0

hwpstate0: <Cool`n'Quiet 2.0> on cpu0

ZFS filesystem version: 5

ZFS storage pool version: features support (5000)

Timecounters tick every 1.000 msec

freenas_sysctl: adding account.

freenas_sysctl: adding directoryservice.

freenas_sysctl: adding middlewared.

freenas_sysctl: adding network.

freenas_sysctl: adding services.

ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled

ugen4.1: <ATI OHCI root HUB> at usbus4

ugen5.1: <ATI EHCI root HUB> at usbus5

uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4

uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5

ugen3.1: <ATI EHCI root HUB> at usbus3

ugen2.1: <ATI OHCI root HUB> at usbus2

uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3

uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2

ugen1.1: <ATI EHCI root HUB> at usbus1

ugen0.1: <ATI OHCI root HUB> at usbus0

uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1

uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0

bge0: link state changed to DOWN

uhub0: 4 ports with 4 removable, self powered

uhub3: 5 ports with 5 removable, self powered

uhub5: 5 ports with 5 removable, self powered

uhub1: 4 ports with 4 removable, self powered

uhub2: 5 ports with 5 removable, self powered

uhub4: 5 ports with 5 removable, self powered

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0

ada0: <WDC WD20EARS-00MVWB0 51.0AB51> ATA8-ACS SATA 2.x device

ada0: Serial Number WD-WMAZA3347277

ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada0: Command Queueing enabled

ada0: 1907729MB (3907029168 512 byte sectors)

ada0: quirks=0x1<4K>

ada1 at ahcich1 bus 0 scbus1 target 0 lun 0

ada1: <SAMSUNG HD204UI 1AQ10001> ATA8-ACS SATA 2.x device

ada1: Serial Number S2H7JD1B209317

ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada1: Command Queueing enabled

ada1: 1907729MB (3907029168 512 byte sectors)

ada1: quirks=0x1<4K>

ada2 at ahcich2 bus 0 scbus2 target 0 lun 0

ada2: <ST2000VN000-1H3164 SC42> ACS-2 ATA SATA 3.x device

ada2: Serial Number W1H1PAHL

ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada2: Command Queueing enabled

ada2: 1907729MB (3907029168 512 byte sectors)

ada3 at ahcich3 bus 0 scbus3 target 0 lun 0

ada3: <Hitachi HDS723020BLA642 MN6OA180> ATA8-ACS SATA 3.x device

ada3: Serial Number MN1221F301K7HA

ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

ada3: Command Queueing enabled

ada3: 1907729MB (3907029168 512 byte sectors)

ada4 at ahcich5 bus 0 scbus5 target 0 lun 0

ada4: <CT120BX500SSD1 M6CR013> ACS-2 ATA SATA 3.x device

ada4: Serial Number 2015E3F6B513

ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)

ada4: Command Queueing enabled

ada4: 114473MB (234441648 512 byte sectors)

random: unblocking device.

Trying to mount root from zfs:freenas-boot/ROOT/11.3-U3.2 []...

lo0: link state changed to UP

pmc: Unknown AMD64 CPU.

pmc: Unknown AMD CPU.

hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>

bge0: link state changed to UP

CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)

  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3

  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

  Features2=0x802009<SSE3,MON,CX16,POPCNT>

  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>

  

 

[smartin80]

Code:

AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>


  SVM: NP,NRIP,NAsids=64


  TSC: P-state invariant


GEOM_MIRROR: Device mirror/swap0 launched (2/2).


GEOM_MIRROR: Device mirror/swap1 launched (2/2).


GEOM_ELI: Device mirror/swap0.eli created.


GEOM_ELI: Encryption: AES-XTS 128


GEOM_ELI:     Crypto: software


GEOM_ELI: Device mirror/swap1.eli created.


GEOM_ELI: Encryption: AES-XTS 128


GEOM_ELI:     Crypto: software


pid 890 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped)


pid 1666 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped)


Waiting (max 60 seconds) for system process `vnlru' to stop... done


Waiting (max 60 seconds) for system process `bufdaemon' to stop... done


Waiting (max 60 seconds) for system process `syncer' to stop...


Syncing disks, vnodes remaining... 0 0 0 0 0 done


All buffers synced.


GEOM_ELI: Device mirror/swap0.eli destroyed.


GEOM_ELI: Detached mirror/swap0.eli on last close.


Uptime: 1d11h29m16s


GEOM_ELI: Device mirror/swap1.eli destroyed.


GEOM_ELI: Detached mirror/swap1.eli on last close.


GEOM_MIRROR: Device swap1: provider destroyed.


GEOM_MIRROR: Device swap1 destroyed.


GEOM_MIRROR: Device swap0: provider destroyed.


GEOM_MIRROR: Device swap0 destroyed.


Copyright (c) 1992-2019 The FreeBSD Project.


Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994


        The Regents of the University of California. All rights reserved.


FreeBSD is a registered trademark of The FreeBSD Foundation.


FreeBSD 11.3-RELEASE-p9 #0 r325575+588899735f7(HEAD): Mon Jun  1 15:04:31 EDT 2020


    root@mp20.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64


FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)


VT(vga): text 80x25


CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)


  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3


  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>


  Features2=0x802009<SSE3,MON,CX16,POPCNT>


  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>


  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>


  SVM: NP,NRIP,NAsids=64


  TSC: P-state invariant


real memory  = 8589934592 (8192 MB)


avail memory = 8251179008 (7868 MB)


Event timer "LAPIC" quality 100


ACPI APIC Table: <HP     ProLiant>


FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs


FreeBSD/SMP: 1 package(s) x 2 core(s)


WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.


Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20171214/tbfadt-748)


ioapic0 <Version 2.1> irqs 0-23 on motherboard


SMP: AP CPU #1 Launched!


Timecounter "TSC" frequency 1497535945 Hz quality 800


random: entropy device external interface


kbd1 at kbdmux0


mlx5en: Mellanox Ethernet driver 3.5.1 (April 2019)


nexus0


vtvga0: <VT VGA driver> on motherboard


cryptosoft0: <software crypto> on motherboard


aesni0: No AESNI support.


padlock0: No ACE support.


acpi0: <HP ProLiant> on motherboard


acpi0: Power Button (fixed)


cpu0: <ACPI CPU> on acpi0


cpu1: <ACPI CPU> on acpi0


attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0


Timecounter "i8254" frequency 1193182 Hz quality 0


Event timer "i8254" frequency 1193182 Hz quality 100


atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0


atrtc0: registered as a time-of-day clock, resolution 1.000000s


Event timer "RTC" frequency 32768 Hz quality 0


hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0


Timecounter "HPET" frequency 14318180 Hz quality 950


Event timer "HPET" frequency 14318180 Hz quality 550


Event timer "HPET1" frequency 14318180 Hz quality 450


Timecounter "ACPI-safe" frequency 3579545 Hz quality 850


acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0


pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0


pcib0: _OSC returned error 0x10


pci0: <ACPI PCI bus> on pcib0


pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0


pci1: <ACPI PCI bus> on pcib1


vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfe7e0000-0xfe7fffff irq 18 at device 0.0 on pci1


vgapci0: Boot video device


pci1: <multimedia, HDA> at device 0.1 (no driver attached)


pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0


pci2: <ACPI PCI bus> on pcib2


pci2: <network> at device 0.0 (no driver attached)


pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0


pci3: <ACPI PCI bus> on pcib3


bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci3


bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E


miibus0: <MII bus> on bge0


brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0


brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow


bge0: Using defaults for TSO: 65518/35/2048


bge0: Ethernet address: e4:11:5b:12:bb:27


ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe6ffc00-0xfe6fffff irq 19at device 17.0 on pci0


ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported


ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>


ahcich0: <AHCI channel> at channel 0 on ahci0


ahcich1: <AHCI channel> at channel 1 on ahci0


ahcich2: <AHCI channel> at channel 2 on ahci0


ahcich3: <AHCI channel> at channel 3 on ahci0


ahcich4: <AHCI channel> at channel 4 on ahci0


ahcich5: <AHCI channel> at channel 5 on ahci0


ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fe000-0xfe6fefff irq 18 at device 18.0 on pci0


usbus0 on ohci0


usbus0: 12Mbps Full Speed USB v1.0


ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff800-0xfe6ff8ff irq17 at device 18.2 on pci0


usbus1: EHCI version 1.0


usbus1 on ehci0


usbus1: 480Mbps High Speed USB v2.0


ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fd000-0xfe6fdfff irq 18 at device 19.0 on pci0


usbus2 on ohci1


usbus2: 12Mbps Full Speed USB v1.0


ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff400-0xfe6ff4ff irq17 at device 19.2 on pci0


usbus3: EHCI version 1.0


usbus3 on ehci1


usbus3: 480Mbps High Speed USB v2.0


isab0: <PCI-ISA bridge> at device 20.3 on pci0


isa0: <ISA bus> on isab0


pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0


pci4: <ACPI PCI bus> on pcib4


ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fc000-0xfe6fcfff irq 18 at device 22.0 on pci0


usbus4 on ohci2


usbus4: 12Mbps Full Speed USB v1.0


ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff000-0xfe6ff0ff irq17 at device 22.2 on pci0


usbus5: EHCI version 1.0


usbus5 on ehci2


usbus5: 480Mbps High Speed USB v2.0


amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4


acpi_button0: <Power Button> on acpi0


ipmi0: <IPMI System Interface> on isa0


ipmi0: KCS mode found at mem 0x0 alignment 0x1 on isa


ipmi0: couldn't configure I/O resource


device_attach: ipmi0 attach returned 6


ipmi0: <IPMI System Interface> at iomem 0-0x1 on isa0


ipmi0: KCS mode found at mem 0x0 alignment 0x1 on isa


ipmi0: couldn't configure I/O resource


device_attach: ipmi0 attach returned 6


amdsbwd0: <AMD SB8xx/SB9xx/Axx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0


hwpstate0: <Cool`n'Quiet 2.0> on cpu0


ZFS filesystem version: 5


ZFS storage pool version: features support (5000)


Timecounters tick every 1.000 msec


freenas_sysctl: adding account.


freenas_sysctl: adding directoryservice.


freenas_sysctl: adding middlewared.


freenas_sysctl: adding network.


freenas_sysctl: adding services.


ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled


ugen4.1: <ATI OHCI root HUB> at usbus4


ugen5.1: <ATI EHCI root HUB> at usbus5


uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4


uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5


ugen3.1: <ATI EHCI root HUB> at usbus3


ugen2.1: <ATI OHCI root HUB> at usbus2


uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3


uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2


ugen1.1: <ATI EHCI root HUB> at usbus1


ugen0.1: <ATI OHCI root HUB> at usbus0


uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1


uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0


bge0: link state changed to DOWN


uhub0: 4 ports with 4 removable, self powered


uhub3: 5 ports with 5 removable, self powered


uhub5: 5 ports with 5 removable, self powered


uhub1: 4 ports with 4 removable, self powered


uhub4: 5 ports with 5 removable, self powered


uhub2: 5 ports with 5 removable, self powered


ada0 at ahcich0 bus 0 scbus0 target 0 lun 0


ada0: <WDC WD20EARS-00MVWB0 51.0AB51> ATA8-ACS SATA 2.x device


ada0: Serial Number WD-WMAZA3347277


ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)


ada0: Command Queueing enabled


ada0: 1907729MB (3907029168 512 byte sectors)


ada0: quirks=0x1<4K>


ada1 at ahcich1 bus 0 scbus1 target 0 lun 0


ada1: <SAMSUNG HD204UI 1AQ10001> ATA8-ACS SATA 2.x device


ada1: Serial Number S2H7JD1B209317


ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)


ada1: Command Queueing enabled


ada1: 1907729MB (3907029168 512 byte sectors)


ada1: quirks=0x1<4K>


ada2 at ahcich2 bus 0 scbus2 target 0 lun 0


ada2: <ST2000VN000-1H3164 SC42> ACS-2 ATA SATA 3.x device


ada2: Serial Number W1H1PAHL


ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)


ada2: Command Queueing enabled


ada2: 1907729MB (3907029168 512 byte sectors)


ada3 at ahcich3 bus 0 scbus3 target 0 lun 0


ada3: <Hitachi HDS723020BLA642 MN6OA180> ATA8-ACS SATA 3.x device


ada3: Serial Number MN1221F301K7HA


ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)


ada3: Command Queueing enabled


ada3: 1907729MB (3907029168 512 byte sectors)


ada4 at ahcich5 bus 0 scbus5 target 0 lun 0


ada4: <CT120BX500SSD1 M6CR013> ACS-2 ATA SATA 3.x device


ada4: Serial Number 2015E3F6B513


ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)


ada4: Command Queueing enabled


ada4: 114473MB (234441648 512 byte sectors)


Trying to mount root from zfs:freenas-boot/ROOT/11.3-U3.2 []...


lo0: link state changed to UP


random: unblocking device.


pmc: Unknown AMD64 CPU.


pmc: Unknown AMD CPU.


hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>


GEOM_MIRROR: Device mirror/swap0 launched (2/2).


bge0: link state changed to UP


GEOM_MIRROR: Device mirror/swap1 launched (2/2).


GEOM_ELI: Device mirror/swap0.eli created.


GEOM_ELI: Encryption: AES-XTS 128


GEOM_ELI:     Crypto: software


CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)


  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3


  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>


  Features2=0x802009<SSE3,

 

[smartin80]

Code:

,SKINIT,WDT,NodeId>
  SVM: NP,NRIP,NAsids=64
  TSC: P-state invariant
root@freenas[~]# gpart list
Geom name: ada0
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029127
first: 40
entries: 128
scheme: GPT
Providers:
1. Name: ada0p1
   Mediasize: 2147483648 (2.0G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e1
   efimedia: HD(1,GPT,18b02a60-a4e8-11ea-9a8c-e4115b12bb27,0x80,0x400000)
   rawuuid: 18b02a60-a4e8-11ea-9a8c-e4115b12bb27
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2147483648
   offset: 65536
   type: freebsd-swap
   index: 1
   end: 4194431
   start: 128
2. Name: ada0p2
   Mediasize: 1998251364352 (1.8T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e2
   efimedia: HD(2,GPT,18c91f78-a4e8-11ea-9a8c-e4115b12bb27,0x400080,0xe8a08808)
   rawuuid: 18c91f78-a4e8-11ea-9a8c-e4115b12bb27
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 1998251364352
   offset: 2147549184
   type: freebsd-zfs
   index: 2
   end: 3907029127
   start: 4194432
Consumers:
1. Name: ada0
   Mediasize: 2000398934016 (1.8T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r2w2e5

Geom name: ada1
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029127
first: 40
entries: 128
scheme: GPT
Providers:
1. Name: ada1p1
   Mediasize: 2147483648 (2.0G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e1
   efimedia: HD(1,GPT,187cb411-a4e8-11ea-9a8c-e4115b12bb27,0x80,0x400000)
   rawuuid: 187cb411-a4e8-11ea-9a8c-e4115b12bb27
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2147483648
   offset: 65536
   type: freebsd-swap
   index: 1
   end: 4194431
   start: 128
2. Name: ada1p2
   Mediasize: 1998251364352 (1.8T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e2
   efimedia: HD(2,GPT,18eecda9-a4e8-11ea-9a8c-e4115b12bb27,0x400080,0xe8a08808)
   rawuuid: 18eecda9-a4e8-11ea-9a8c-e4115b12bb27
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 1998251364352
   offset: 2147549184
   type: freebsd-zfs
   index: 2
   end: 3907029127
   start: 4194432
Consumers:
1. Name: ada1
   Mediasize: 2000398934016 (1.8T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r2w2e5

Geom name: ada2
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029127
first: 40
entries: 128
scheme: GPT
Providers:
1. Name: ada2p1
   Mediasize: 2147483648 (2.0G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e1
   efimedia: HD(1,GPT,18a19ac7-a4e8-11ea-9a8c-e4115b12bb27,0x80,0x400000)
   rawuuid: 18a19ac7-a4e8-11ea-9a8c-e4115b12bb27
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2147483648
   offset: 65536
   type: freebsd-swap
   index: 1
   end: 4194431
   start: 128
2. Name: ada2p2
   Mediasize: 1998251364352 (1.8T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e2
   efimedia: HD(2,GPT,18e1458f-a4e8-11ea-9a8c-e4115b12bb27,0x400080,0xe8a08808)
   rawuuid: 18e1458f-a4e8-11ea-9a8c-e4115b12bb27
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 1998251364352
   offset: 2147549184
   type: freebsd-zfs
   index: 2
   end: 3907029127
   start: 4194432
Consumers:
1. Name: ada2
   Mediasize: 2000398934016 (1.8T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r2w2e5

Geom name: ada3
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029127
first: 40
entries: 128
scheme: GPT
Providers:
1. Name: ada3p1
   Mediasize: 2147483648 (2.0G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 65536
   Mode: r1w1e1
   efimedia: HD(1,GPT,188fe8f4-a4e8-11ea-9a8c-e4115b12bb27,0x80,0x400000)
   rawuuid: 188fe8f4-a4e8-11ea-9a8c-e4115b12bb27
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2147483648
   offset: 65536
   type: freebsd-swap
   index: 1
   end: 4194431
   start: 128
2. Name: ada3p2
   Mediasize: 1998251364352 (1.8T)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 2147549184
   Mode: r1w1e2
   efimedia: HD(2,GPT,18d6efcc-a4e8-11ea-9a8c-e4115b12bb27,0x400080,0xe8a08808)
   rawuuid: 18d6efcc-a4e8-11ea-9a8c-e4115b12bb27
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 1998251364352
   offset: 2147549184
   type: freebsd-zfs
   index: 2
   end: 3907029127
   start: 4194432
Consumers:
1. Name: ada3
   Mediasize: 2000398934016 (1.8T)
   Sectorsize: 512
   Mode: r2w2e5

Geom name: ada4
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 234441607
first: 40
entries: 128
scheme: GPT
Providers:
1. Name: ada4p1
   Mediasize: 524288 (512K)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 20480
   Mode: r0w0e0
   efimedia: HD(1,GPT,b49aa6cd-a4dd-11ea-9d11-e4115b12bb27,0x28,0x400)
   rawuuid: b49aa6cd-a4dd-11ea-9d11-e4115b12bb27
   rawtype: 83bd6b9d-7f41-11dc-be0b-001560b84f0f
   label: (null)
   length: 524288
   offset: 20480
   type: freebsd-boot
   index: 1
   end: 1063
   start: 40
2. Name: ada4p2
   Mediasize: 102844334080 (96G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 544768
   Mode: r1w1e1
   efimedia: HD(2,GPT,b4a21cf1-a4dd-11ea-9d11-e4115b12bb27,0x2000428,0xbf90000)
   rawuuid: b4a21cf1-a4dd-11ea-9d11-e4115b12bb27
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 102844334080
   offset: 17180413952
   type: freebsd-zfs
   index: 2
   end: 234423335
   start: 33555496
3. Name: ada4p3
   Mediasize: 17179869184 (16G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 544768
   Mode: r0w0e0
   efimedia: HD(3,GPT,b49e9f75-a4dd-11ea-9d11-e4115b12bb27,0x428,0x2000000)
   rawuuid: b49e9f75-a4dd-11ea-9d11-e4115b12bb27
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 17179869184
   offset: 544768
   type: freebsd-swap
   index: 3
   end: 33555495
   start: 1064

 

[Patrick M. Hausen]

So you have three different 1.9 TB drives in your pool? Did I get that correctly?
1 HGST Deskstar
1 Seagate Ironwolf NAS drive
1 WD Caviar Green

I would see a problem if your pool was actually resilvering because two of your drives are desktop drives that possibly use SMR. But a scrub that does not detect any inconsistencies is just reading the disk, nothing else. In principle the pool should be fine.
I there any other disk activity going on in parallel? Specifically things that would cause a lot of seeking?

Your memory is a bit low in general, though I don't know from the top of my head how that is related to scrub speed.

Anyone else with an idea?

 

[smartin80]

So you have three different 1.9 TB drives in your pool? Did I get that correctly?
1 HGST Deskstar
1 Seagate Ironwolf NAS drive
1 WD Caviar Green

I would see a problem if your pool was actually resilvering because two of your drives are desktop drives that possibly use SMR. But a scrub that does not detect any inconsistencies is just reading the disk, nothing else.
I there any other disk activity going on in parallel? Specifically things that would cause a lot of seeking?

Anyone else with an idea?

Patrick,

There are 4 2TB drives... The share isn't even mounted at the moment...

S

 

[Patrick M. Hausen]

Your zpool status is cut off, it shows only three and one with only half the GPTID.

 

[smartin80]

Your zpool status is cut off, it shows only three and one with only half the GPTID.

Can't copy/paste the last section for some reason. Tried three times...

S

 

[smartin80]

Screen grab attached...

 

[smartin80]

Your zpool status is cut off, it shows only three and one with only half the GPTID.

Thanks for trying anyway. Is there any point in letting it run?

S

 

[Patrick M. Hausen]

Ok, there's a Samsung Ecogreen drive in addition to the three I already listed.
Is there a reason why you picked 4 completely different drives? But as I wrote strictly for reading that should not be a problem.

 

[smartin80]

Can these alerts have anything to do with it...?

Code:

Device: /dev/ada3, Self-Test Log error count increased from 0 to 1.
Sun, 14 Jun 2020 12:40:12 AM (Europe/London)Dismiss

WARNING

Device: /dev/ada0, Self-Test Log error count increased from 0 to 1.

Sun, 14 Jun 2020 12:40:23 AM (Europe/London)

 

[smartin80]

Ok, there's a Samsung Ecogreen drive in addition to the three I already listed.
Is there a reason why you picked 4 completely different drives? But as I wrote strictly for reading that should not be a problem.

They're repurposed drives. All I have for now...

S

 

[Patrick M. Hausen]

Is the system possibly swapping to the disks because of the low memory? swapinfo and vmstat 2 would tell that.