New TrueNAS-SCALE-22.12.0 Bluefish installation, some services failed during the boot process

[ASap]

Hi everyone, I'm so excited with my first TrueNAS build:

• ASUS Prime B660M-A WIFI D4
• Intel Core i5-12400
• 32 GB (Non-ECC)
• 4 TB Seagate IronWolf Pro in Raid Z (true-pool) and 256 GB WDC NVMe (boot-pool)
• Onboard SATA Controller
• Intel® Gigabit Ethernet Connection I219-V

However, I see some services failed to start during the boot process. Should I worry about them?

 

[ASap]

Here's a better picture. I'm wondering if anyone else has the same issue.

 

[artlessknave]

Should I worry about them?

nope.

not a great choice for mobo but at least it's an intel NIC.

Raid Z (true-pool)

there is no "RAID Z". it must be raidz1,2,3.
you don't say how many disks. hopefully you havent put raidz1 with 4TB disks.

 

[ASap]

I have 4x4TB Seagate Ironwolf Pro disks in raid Z1. Is there any issue with this configuration? I've seen many builds with 4x4TB in RAID5 (or Z1)

 

[artlessknave]

raidz1 with disks over 2TB is highly discouraged without at least a backup. RAID5 and raidz have zero redundancy while rebuilding. if anything goes wrong while re-silvering your drives, the pool can be lost, and re-silvering puts a significant amount of usage on the disks while rebuilding, meaning increased chances of another drive also being lost before the re-silver can complete.
drives greater than 2TB start to take a really long time to resilver, exacerbating the risk.