I just installed 9.10.2-U3 and I cannot ping the IP or reach the GUI from another machine on the network. From the machine shell I cannot ping the gateway or any other machine on the network. My router is set up as the dhcp server for 192.168.0.10 through 192.168.0.255. I had reserved ip 192.168.0.14 for that mac in my router. With the interface configured for dhcp its giving me an IP of 0.0.0.0 which doesn't work. If I try setting the IP to 192.168.0.14 or 192.168.0.9 it still doesn't work. Not sure what to try next. How do I mount a fat32 formatted USB stick in the shell so I can add command output?
Router: NetGear N450-100NAS
Motherboard: ASRock FM2A88X-ITX+
Processor: AMD A8 7600
Memory: 8gb
OS on 16gb USB stick
2 WD Red 4tb drives with ZFS mirror
I also have arch Linux installed on a 128gb SSD. It's been handling the ZFS mirror and Plex. I can still boot it an get everything working.
Thanks
Chris
Router: NetGear N450-100NAS
Motherboard: ASRock FM2A88X-ITX+
Processor: AMD A8 7600
Memory: 8gb
OS on 16gb USB stick
2 WD Red 4tb drives with ZFS mirror
I also have arch Linux installed on a 128gb SSD. It's been handling the ZFS mirror and Plex. I can still boot it an get everything working.
Thanks
Chris