VioletDragon
Patron
- Joined
- Aug 6, 2017
- Messages
- 251
Hi folks,
I have a issue with my Server again im getting these CAM errors it mentions about the drive being re-attached but zpool status shows different as its not re-silvering the array or the drive is not removed from the array, i removed the drive and did a SMART test on it yesterday but i cannot see any issues, would anyone have any ideas?
I have a issue with my Server again im getting these CAM errors it mentions about the drive being re-attached but zpool status shows different as its not re-silvering the array or the drive is not removed from the array, i removed the drive and did a SMART test on it yesterday but i cannot see any issues, would anyone have any ideas?
Code:
mps0: mpssas_prepare_remove: Sending reset for target ID 15 da10 at mps0 bus 0 scbus0 target 15 lun 0 mps0: da10: <ATA ST1000DM010-2EP1 CC43> s/n Z9AR1MFP detached (da10:mps0:0:15:0): WRITE(10). CDB: 2a 00 02 2b 5a c0 00 00 60 00 Unfreezing devq for target ID 15 (da10:mps0:0:15:0): CAM status: CCB request aborted by the host (da10:mps0:0:15:0): Error 5, Periph was invalidated (da10:mps0:0:15:0): Periph destroyed mps0: SAS Address for SATA device = 3c2f56516485484e mps0: SAS Address from SATA device = 3c2f56516485484e da10 at mps0 bus 0 scbus0 target 15 lun 0 da10: <ATA ST1000DM010-2EP1 CC43> Fixed Direct Access SPC-4 SCSI device da10: Serial Number Z9AR1MFP da10: 600.000MB/s transfers da10: Command Queueing enabled da10: 953869MB (1953525168 512 byte sectors) da10: quirks=0x8<4K> ses0: da10,pass11: Element descriptor: 'ArrayDevice04' ses0: da10,pass11: SAS Device Slot Element: 1 Phys at Slot 4 ses0: phy 0: SATA device ses0: phy 0: parent 500605b0000274bf addr 500605b0000274a4 mps0: mpssas_prepare_remove: Sending reset for target ID 15 da10 at mps0 bus 0 scbus0 target 15 lun 0 mps0: da10: Unfreezing devq for target ID 15 <ATA ST1000DM010-2EP1 CC43> s/n Z9AR1MFP detached (da10:mps0:0:15:0): Periph destroyed mps0: SAS Address for SATA device = 3c2f56516485484e mps0: SAS Address from SATA device = 3c2f56516485484e da10 at mps0 bus 0 scbus0 target 15 lun 0 da10: <ATA ST1000DM010-2EP1 CC43> Fixed Direct Access SPC-4 SCSI device da10: Serial Number Z9AR1MFP da10: 600.000MB/s transfers da10: Command Queueing enabled da10: 953869MB (1953525168 512 byte sectors) da10: quirks=0x8<4K> ses0: da10,pass11: Element descriptor: 'ArrayDevice04' ses0: da10,pass11: SAS Device Slot Element: 1 Phys at Slot 4 ses0: phy 0: SATA device ses0: phy 0: parent 500605b0000274bf addr 500605b0000274a4
Code:
zpool status iSCSI pool: iSCSI state: ONLINE scan: resilvered 124M in 0 days 00:00:03 with 0 errors on Fri Jan 15 15:40:31 2021 config: NAME STATE READ WRITE CKSUM iSCSI ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/7c39221d-ea2c-11e9-b7f4-0017087d2e9a ONLINE 0 0 0 gptid/7cea36c6-ea2c-11e9-b7f4-0017087d2e9a ONLINE 0 0 0 gptid/470b7803-36c0-11eb-80e1-00074309b09a ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 gptid/7d87604a-ea2c-11e9-b7f4-0017087d2e9a ONLINE 0 0 0 gptid/7e3eae42-ea2c-11e9-b7f4-0017087d2e9a ONLINE 0 0 0 gptid/f5b603a3-36d6-11eb-80e1-00074309b09a ONLINE 0 0 0 errors: No known data errors
Last edited: