SOLVED Moving FreeNAS to new PC

[HussainJH]

I want to move my FreeNAS system to new PC.
What I think of doing now is just remove the OS flash drive and the HDD from the old PC and put them on the new one.
Is there any other steps I need to do ?

 

[HussainJH]

I only have one HDD, formatted as ZFS. No Raid system.

 

[Samuel Tai]

Are the old and new machines the same hardware? A little more info, please.

 

[HussainJH]

N

Are the old and new machines the same hardware? A little more info, please.

No, only the flash drive and HDD will remain the same.
Forgive my ignorance, but what more info do you need ?

 

[danb35]

Odds are it will work just fine. You may need to reconfigure your network adapter, though. See also:

Moving TrueNAS to new Hardware

So, you want to move from your crusty old hardware to a shiny new server? Here's what you have to do: Assemble and test your new hardware Turn off both systems Disconnect your boot device from the old server and connect it to the new server...

www.truenas.com

 

[HussainJH]

I just moved it to the new PC.
I can boot but I get:
"The web interface could not be accessed.
Please check network configuration"
How to fix that ?

 

[HussainJH]

I just moved it to the new PC.
I can boot but I get:
"The web interface could not be accessed.
Please check network configuration"
How to fix that ?

I manage to figure it out myself.
Thank you.

 

[ChrisRJ]

I manage to figure it out myself.
Thank you.

It is considered good practice to provide details, so that others may benefit from your success.

 

[danb35]

I would expect it was just a matter of:

You may need to reconfigure your network adapter, though.

But it would be good to have confirmation.

 

[HussainJH]

It is considered good practice to provide details, so that others may benefit from your success.

I just had to manually set an IP address.
Just entered 1 (Configure Network Interface) and followed along. It was fairly simple.