mounting file systems error

[Bartko]

Hi,at the beginning sorry for my very poor English.
I have a problem with my FreeNAS 8. Here is what is displayed:

Drive activity LED is lit all the time.
I have two 640GB SATA drives in a hardware RAID (mirror) as a file store.
In separate drive (flash memory) is FreeNAS.
The system worked for over a year without any problems.
When I wanted to copy the files (15GB) using the command "cp-r" data from one folder to another it crashed. I have 450GB used from 600GB.
The last thing FreeNAS is done is sent me an e-mail:
"SMART error (FailedOpenDevice) detected on host: dysk.bknet"

Code:

This email was generated by the smartd daemon running on:

    host name: dysk.bknet
   DNS domain: bknet
   NIS domain:

 The following warning/error was logged by the smartd daemon:

 Device: /dev/ada1, unable to open device

 For details see host's SYSLOG.

 You can also use the smartctl utility for further investigation.
 No additional email messages about this problem will be sent.

Problem with FreeNAS or with disks? :-/

Help, please...

 

[buriakko]

Hi, Bartko.
Did you solved?
I've the same problem.
Bye.

 

[ProtoSD]

Try replacing your flash drive.

 

[Bartko]

Yes!
Try first to run FreeNAS from another pendrive or CD.
The problem was the SATA cable. I replaced the SATA cable and it works.

 

[buriakko]

Hi.
I replaced my flash drive
(using: "From the ISO" and "Upgrading a FreeNAS Installation" in: http://doc.freenas.org/index.php/Upgrading_FreeNAS®).

Finally, it works again
Thank you, protosd.
Bye.