tmacka88
Patron
- Joined
- Jul 5, 2011
- Messages
- 268
Hi,
I just received a email notification:
Subject
Body
Just wondering what the best course of action is from here. How do I confirm that the disk has failed?
I am running 4 drives on my M1015 controller (that has been reflashed) and 2 drives on my MB. Setup includes 6 x 3TB RAIDz2.
$ zpool status
Doing some searching on the forum. I have tried running some smart test again from shell.
$ smartctl -q noserial -a /dev/da3
$ cat /usr/local/etc/smartd.conf
Any help would be great. Thanks
P.S please indicate the shel commands to run as I am not familiar with running these tests. Doesnt look like the ones I ran above have been working.
I just received a email notification:
Subject
SMART error (FailedOpenDevice) detected on host: FreeNAS
Body
This message was generated by the smartd daemon running on:
host name: FreeNAS
DNS domain: local
The following warning/error was logged by the smartd daemon:
Device: /dev/da3 [SAT], unable to open device
Device info:
WDC WD30EZRX-00DC0B0, S/N:WD-WCC1T1416374, WWN:5-0014ee-25e0bbcc2, FW:80.00A80, 3.00 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
No additional messages about this problem will be sent.
Just wondering what the best course of action is from here. How do I confirm that the disk has failed?
I am running 4 drives on my M1015 controller (that has been reflashed) and 2 drives on my MB. Setup includes 6 x 3TB RAIDz2.
$ zpool status
Code:
pool: Volume4 state: DEGRADED status: One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Online the device using 'zpool online' or replace the device with 'zpool replace'. scan: resilvered 4.36G in 0h2m with 0 errors on Sat Nov 16 16:37:37 2013 config: NAME STATE READ WRITE CKSUM Volume4 DEGRADED 0 0 0 raidz2-0 DEGRADED 0 0 0 gptid/916ff50d-3151-11e3-92fc-f46d04de02ec ONLINE 0 0 0 gptid/92784bd8-3151-11e3-92fc-f46d04de02ec ONLINE 0 0 0 gptid/9372b04c-3151-11e3-92fc-f46d04de02ec ONLINE 0 0 0 gptid/94811c78-3151-11e3-92fc-f46d04de02ec ONLINE 0 0 0 gptid/958895ad-3151-11e3-92fc-f46d04de02ec ONLINE 0 0 0 8659309636289833160 REMOVED 0 0 0 was /dev/gptid/96a49781-3151-11e3-92fc-f46d04de02ec errors: No known data errors
Doing some searching on the forum. I have tried running some smart test again from shell.
$ smartctl -q noserial -a /dev/da3
Code:
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org /dev/xpt0 control device couldn't opened: Permission denied Unable to get CAM device list /dev/da3: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary
$ cat /usr/local/etc/smartd.conf
Code:
################################################ # smartd.conf generated by /etc/rc.d/ix-smartd ################################################ /dev/da0 -n never -W 0,55,60 -m email@gmail.com -m root /dev/ada1 -n never -W 0,55,60 -m email@gmail.com -m root /dev/da1 -n never -W 0,55,60 -m email@gmail.com -m root /dev/ada0 -n never -W 0,55,60 -m email@gmail.com -m root /dev/da2 -n never -W 0,55,60 -m email@gmail.com /dev/da3 -n never -W 0,55,60 -m email@gmail.com
Any help would be great. Thanks
P.S please indicate the shel commands to run as I am not familiar with running these tests. Doesnt look like the ones I ran above have been working.