Hi,
I'm sorry if, I'm in the wrong category.
I've just set up many fib (3). I'm going to explain my configuration.
1 pfsense (3vlans, 101, 102, 103) > Freenas (lacp, vlan 101, 102, 103)
I set up :
vlan101(mgmt) fib0 : 10.1.0.0/24, bound GUI, ssh, defaut gateway 10.1.0.254
vlan102(user) fib1 : 10.2.0.0/24, bound SMB, defaut gateway 10.2.0.254
vlan103(DMZ) fib2 : 10.3.0.0/24, bound jails, defaut gateway 10.3.0.254
My issue, is when I used smb. If, I am in other network 10.1 or 10.3, that works.
But whan I am in 10.2 I received non SYN, ACK.
Server to client :
In attachment my wireshark
I'm totally blind about this trouble
I'm sorry if, I'm in the wrong category.
I've just set up many fib (3). I'm going to explain my configuration.
1 pfsense (3vlans, 101, 102, 103) > Freenas (lacp, vlan 101, 102, 103)
I set up :
vlan101(mgmt) fib0 : 10.1.0.0/24, bound GUI, ssh, defaut gateway 10.1.0.254
vlan102(user) fib1 : 10.2.0.0/24, bound SMB, defaut gateway 10.2.0.254
vlan103(DMZ) fib2 : 10.3.0.0/24, bound jails, defaut gateway 10.3.0.254
My issue, is when I used smb. If, I am in other network 10.1 or 10.3, that works.
But whan I am in 10.2 I received non SYN, ACK.
root@jokul:~ # setfib 0 netstat -rn
Routing tables
Internet:
Destination Gateway Flags Netif Expire
default 10.1.0.254 UGS vlan101
10.1.0.0/24 link#5 U vlan101
10.1.0.3 link#5 UHS lo0
127.0.0.1 link#3 UH lo0
root@jokul:~ # setfib 1 netstat -rn
Routing tables (fib: 1)
Internet:
Destination Gateway Flags Netif Expire
default 10.2.0.254 UGS vlan102
10.2.0.0/24 link#6 U vlan102
10.2.0.1 link#6 UHS lo0
127.0.0.1 lo0 UHS lo0
root@jokul:~ # setfib 2 netstat -rn
Routing tables (fib: 2)
Internet:
Destination Gateway Flags Netif Expire
default 10.3.0.254 UGS vlan103
10.3.0.0/24 link#7 U vlan103
10.3.0.1 link#7 UHS lo0
127.0.0.1 lo0 UHS lo0
root@jokul:~ # sockstat -4l
USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS
root smbd 8620 32 tcp4 10.2.0.1:445 *:*
root smbd 8620 33 tcp4 10.2.0.1:139 *:*
root smbd 8620 34 tcp4 127.0.0.1:445 *:*
root smbd 8620 35 tcp4 127.0.0.1:139 *:*
root nmbd 8616 16 udp4 *:137 *:*
root nmbd 8616 17 udp4 *:138 *:*
root nmbd 8616 18 udp4 10.2.0.1:137 *:*
root nmbd 8616 19 udp4 10.2.0.255:137 *:*
root nmbd 8616 20 udp4 10.2.0.1:138 *:*
root nmbd 8616 21 udp4 10.2.0.255:138 *:*
root uwsgi-3.6 3952 3 tcp4 127.0.0.1:9042 *:*
root uwsgi-3.6 3609 3 tcp4 127.0.0.1:9042 *:*
www nginx 3539 6 tcp4 10.1.0.3:4443 *:*
root nginx 3538 6 tcp4 10.1.0.3:4443 *:*
root ntpd 3193 21 udp4 *:123 *:*
root ntpd 3193 24 udp4 127.0.0.1:123 *:*
root ntpd 3193 25 udp4 10.1.0.3:123 *:*
root ntpd 3193 26 udp4 10.2.0.1:123 *:*
root ntpd 3193 27 udp4 10.3.0.1:123 *:*
root sshd 3113 4 tcp4 10.1.0.3:4222 *:*
root sshd 3113 5 tcp4 127.0.0.1:4222 *:*
Server to client :
root@jokul:~ # setfib 1 ping 10.2.0.9
PING 10.2.0.9 (10.2.0.9): 56 data bytes
64 bytes from 10.2.0.9: icmp_seq=0 ttl=128 time=0.348 ms
64 bytes from 10.2.0.9: icmp_seq=1 ttl=128 time=3.178 ms
64 bytes from 10.2.0.9: icmp_seq=2 ttl=128 time=0.563 ms
64 bytes from 10.2.0.9: icmp_seq=3 ttl=128 time=0.371 ms
In attachment my wireshark
I'm totally blind about this trouble
Attachments
Last edited: