SOLVED Machine won’t boot after fresh install

[epikkka]

Hello,

Already using Core went for a try work scale but after install it, it won’t boot.

It freezes randomly in different stages of the system boot.

Already tried to only have the boot ssd on, but even though it will not boot. I am connected to a monitor using the nvidia quadro, should I try to connect using the onboard GPU?

Another thing I noticed is that In CORE installation it asks to boot as UEFI or Classic BIOS. If I select UEFI it will not boot, only with classic BIOS. But in the SCALE install screens I don’t hand that option. Could this be an issue?

Any other thoughts?
Thanks guys.

 

[epikkka]

Ahhh BTW,

My system:
Motherboard ASUS Z10PA-D8
CPU 2x Intel E5-2650 v3
RAM 8x8gb ECC REG 2133mhz DDR4
8x 4TB WD hdd
2x 240Gb Toshiba SSD
Nvidia Quadro P400

 

[Samuel Tai]

What version of BIOS, and have you configured the BIOS for UEFI boot?

 

[epikkka]

What version of BIOS, and have you configured the BIOS for UEFI boot?

You’re right, it wasn’t.
I changed to UEFI and now it’s running fine, thanks.

Problem solved.