lstgt command

[filipvh]

I have set up iscsi through the GUI without any problems.
I wanted to use a script, intended for FreeBSD, but it failed because the command lstgt was not found. Is there a solution to this, preferably without modifying the script. Or am I missing some important diffs between BSD and NAS?

Running FreeNAS 11

Thx!

 

[anodos]

I have set up iscsi through the GUI without any problems.
I wanted to use a script, intended for FreeBSD, but it failed because the command lstgt was not found. Is there a solution to this, preferably without modifying the script. Or am I missing some important diffs between BSD and NAS?

Running FreeNAS 11

Thx!

FreeNAS uses ctl. Not net/istgt. You will need to rewrite your script to use appropriate commands using ctl.

 

[filipvh]

FreeNAS uses ctl. Not net/istgt. You will need to rewrite your script to use appropriate commands using ctl.

Thx for the quick response.
Is this an other iscsi implementation or different tool?

 

[mav@]

It is completely different SCSI target implementation, used for iSCSI, Fibre Channel UMASS and other things.

 

[rvyhmeister]

I'm facing the same problem using Proxmox... for the iSCSI provider they offer these options: Comstar, istgt, IET and LIO. BSD normally uses (used?) istgt, but now it is no longer present...

On the Proxmox forums, they have suggested that there is a solution out there somewhere, but I can't find it... any ideas? Thanks!