Hello Everyone,
I have a Supermicro X11SSL-cf Motherboard with an onboard LSI 3008 HBA flashed in IT mode.
Currently i have it running with the P12 Firmware.
But when I run this command: 'dmesg | grep mpr'
I get this:
....
mpr0: Firmware: 12.00.02.00, Driver: 15.01.00.00-fbsd
....
Now I know they always say that the firmware version has to match the driver version.
But at the time of building my server there was the an issue with the P13 Driver.
According to this issue:
https://forums.freenas.org/index.php?threads/lsi-3008-it-firmware-mismatch.49587/
https://bugs.freenas.org/issues/20007
So is sticked with the P12 Firmware because it didnt give me any headache.
But for quite some time now I am experiencing an issue where overnight I recieve an email with this error:
> (da0:mpr0:0:4:0): WRITE(10). CDB: 2a 00 02 65 9a c8 00 00 08 00
> (da0:mpr0:0:4:0): CAM status: SCSI Status Error
> (da0:mpr0:0:4:0): SCSI status: Check Condition
> (da0:mpr0:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
> (da0:mpr0:0:4:0): Retrying command (per sense data)
So i was wondering maybe it will help if i upgrade the firmware to the newest version.
Right now when i check that latest version according to this link:
ftp://ftp.supermicro.com/Driver/SAS/LSI/3008/Firmware/
I only see the P14 driver, so I assume that this is the latest driver.
Can someone tell me if this is the right Firmware to use and if it doenst matter that this doesnt match the V15 driver?
Thanks in advance!
I have a Supermicro X11SSL-cf Motherboard with an onboard LSI 3008 HBA flashed in IT mode.
Currently i have it running with the P12 Firmware.
But when I run this command: 'dmesg | grep mpr'
I get this:
....
mpr0: Firmware: 12.00.02.00, Driver: 15.01.00.00-fbsd
....
Now I know they always say that the firmware version has to match the driver version.
But at the time of building my server there was the an issue with the P13 Driver.
According to this issue:
https://forums.freenas.org/index.php?threads/lsi-3008-it-firmware-mismatch.49587/
https://bugs.freenas.org/issues/20007
So is sticked with the P12 Firmware because it didnt give me any headache.
But for quite some time now I am experiencing an issue where overnight I recieve an email with this error:
> (da0:mpr0:0:4:0): WRITE(10). CDB: 2a 00 02 65 9a c8 00 00 08 00
> (da0:mpr0:0:4:0): CAM status: SCSI Status Error
> (da0:mpr0:0:4:0): SCSI status: Check Condition
> (da0:mpr0:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
> (da0:mpr0:0:4:0): Retrying command (per sense data)
So i was wondering maybe it will help if i upgrade the firmware to the newest version.
Right now when i check that latest version according to this link:
ftp://ftp.supermicro.com/Driver/SAS/LSI/3008/Firmware/
I only see the P14 driver, so I assume that this is the latest driver.
Can someone tell me if this is the right Firmware to use and if it doenst matter that this doesnt match the V15 driver?
Thanks in advance!