intel x520-da2, with SFP+ 10Gb. FreeNAS-9.3

[rather]

Have intel x520-da2, with SFP+ 10Gb. FreeNAS-9.3

ifconfig
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO>
ether 0c:c4:7a:16:97:60
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO>
ether 0c:c4:7a:16:97:61
inet 192.168.170.39 netmask 0xffffff00 broadcast 192.168.170.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=404bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,LRO,VLAN_HWTSO>
ether 90:e2:ba:7d:72:a0
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=404bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,LRO,VLAN_HWTSO>
ether 90:e2:ba:7d:72:a1
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
nd6 options=9<PERFORMNUD,IFDISABLED>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

Any ideas?

 

[Fuganater]

I'm gonna ask the dumb question... What is your issue?

 

[depasseg]

I thought it was just a proclamation.

 

[gpsguy]

perhaps -> status: no carrier

 

[jgreco]

We'd need some sort of information about what you're trying to do and what you've got hooked up. The X520-SR2 works fine, and the -DA2 should work fine as long as you've loaded Intel optics or a compatible twinax cable.

 

[rather]

Thank's to all! Problem solved!

 

[depasseg]

That was easy....

 

[jgreco]

Thank's to all! Problem solved!

Well?!?!?! What *was* it?