installing on a dl360 g6 crash after reboot

[recki]

Hey Guys,

i had try to install the actuall release on a dl360 g6 with sata SSD and after reboot a crash occure. I post a pic from the crash. Any Ideas for me?

regards ré

 

[SweetAndLow]

What version of freenas? Looks like a bad install or unsupported hardware.

You should read up on how to ask a technical question, forming it the way you did is not helpful.

Sent from my Nexus 5X using Tapatalk

 

[recki]

Hi,

thanks for answering. I use Freenas 9.10 and also try Corral, but both has the same issue. The DL360_G6 is a standart Proliant Server and Freebsd works very well on it.

regard ré

 

[recki]

Hey Guys,

sorry for the delay, now i write the Error Message. I try it with 9.10 and Corral hast the same issues.

Code:

Timecounter "TSC" frequency 2000116076 Hz quality 1000
Trying to mount root from zfs:freenas-boot/ROOT/default []...
init: not found in path /sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init
panic: no init
cpuid = 7
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe110378e9d0
kbd_backtrace() at kbd_backtrace+0x39/frame 0xfffffe110378ea80

then comes a lot of more panicmessages. Has anyone ideas? The Server is an DL360 G6 with 2x E5504 CPU and 72GB Ram 2 SATA 16GB SSD on a P410 configured es 2 indipendent single Raid0 Disks. FreeBSD 9,10 and 11 run fine in the same configuration.

regards ré

 

[SweetAndLow]

Looks like bad install or install media. And you should not be using raid 0 disks, you will lose all your data with that config.

Sent from my Nexus 5X using Tapatalk

 

[recki]

Hi, i have 2 of the Raid0 Disks for a Geom Mirror or ZFS Mirror ;-) But passtrough is not supportet by HP for the Raid SAS Controller...
I install with the ilo2 virtual Media. I try it with an USB Stick again.

thanks ré

 

[SweetAndLow]

Hi, i have 2 of the Raid0 Disks for a Geom Mirror or ZFS Mirror ;-) But passtrough is not supportet by HP for the Raid SAS Controller...
I install with the ilo2 virtual Media. I try it with an USB Stick again.

thanks ré

Good for you but you should not do that with zfs. One second everything will be ok then poof gone.

Sent from my Nexus 5X using Tapatalk

 

[recki]

Hi,

next attempt with corral, i checked the shasum and its ok. the USB Stick is 8GB and new. I hope thats not the reason?

Code:

active set on da0
md0.utip: UZIP(zlib) inflate() failed
g_vfs_done():md0.uzip[READ(offset=blabla, length=bla)]error=86
Traceback (most recent call last):
 File "/usr/local/bin/freenas-install", line 60, in <module>
	if installer.GetPackages() is not True:
 File "/usr/lcal/lib/freenasOS/Installer.py", line 1222, in FindPackageFile
  from .Update PkgFileDeltaOnly, PkgFileFullOnly
 File "<frozen importlib._bootstrap>", line 961, in _find_and_load
 File "<frozen importlib._bootstrap>", line 950, in _find_and_load_onlocked
 File "<frozen importlib._bootstrap>", line 655, in _load_unlocked
 File "<frozen importlib._bootstrap_external>", line 674, in exec_module
 File "<frozen importlib._bootstrap_external>", line 780, in get_code
 File "<frozen importlib._bootstrap_external>", line 833, in get_data
OSError: [Errno 86] Illegal byte sequence
Teh FreeNAS installation on da0 has failed. Press enter to continue....

regards ré

 

[SweetAndLow]

How are you creating the USB installer?

Sent from my Nexus 5X using Tapatalk

 

[recki]

Hello,

Hi, now it runs! I have exchange the 2x Raid0 Disk in a Raid1 set. reinstall and it works.
I did not create an installer. I only dd the iso to a USB Drive ;-) Its recommend to create an installer?

regards ré

 

[SweetAndLow]

Dude! Stop right now and throw that raid card in the trash.

Sent from my Nexus 5X using Tapatalk

 

[recki]

Hi,

i would if i could :-( But its an build in on a Proliant Server.

regards ré

 

[SweetAndLow]

Hi,

i would if i could :-( But its an build in on a Proliant Server.

regards ré

Ok then don't use it for freenas or zfs.

Sent from my Nexus 5X using Tapatalk

 

[recki]

Hi, it works with FreeBSD and the same configuration perfect. Why should i dont use it for FreeNAS? I use Prolient Server since FreeBSD 4.x and had no Problems.

regards ré