Hi Stilez,
liked you article about killing SMB1, I having lot of trouble in getting working simple xcopy backup in 10 PC Win10 machines on to Win7 backup machine.
Just a new finding when I applied this from your article on a Windows 10 Pro machine:
sc config mrxsmb10 start=disabled
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters /v SMB1 /t REG_DWORD /d 0 /f
after reboot, I could see WSD Windows 7 machines, but i cannot access them with an error that the network service is not started.
Going trough services. msc and finding Workstation service disabled, I could not started with an error that dependency service could not be started.
I thought maybe starting mrxsbm20 would solve the problem so i did this from this site:
eddiejackson.net
Enables the SMBv2 and SMBv3 on the SMB client by running the below commands
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
sc.exe config mrxsmb20 start= auto
reboot, couple of times, nothing, same error that the network service is not started.
So finally founded this solution on this link:
social.technet.microsoft.com
using Regedit
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanworkstation
On the right there should be a "DependOnService" and "DependOnGroup", delete these 2 and reboot.
It is working now, but funny thing about this crazy Win10 networking that only Win 7 machines as WSD discovey are now showed in Network.
I will apply this to my other Win10 machines.