Hi Guys, i have a problem cant passthrough AHCI Controllers, i have X10SRI -F with 8 x HGST 4T one intel ssd run ESXi (see all my system below). in the bios total i have two groups SATA and eSATA which i can see that are showing plugged in, in the ESXi i have two Wellsburg AHCI Controllers greyed out which i assume are my bios SATA groups. both groups where already enabled before i installed the ESXi 6.7 and FreeNAS 11.2 BETA2 VM. in the ESXi CLI passthrou.map i added the AHCI IDs and rebooted, but it's not working still greyed out. is there any workaround to fix it for now with my current hardware as its my production machine, sorry i couldn't wait :) . i plan to get better SSD, NICs and if necessary PCI cards for the HDD soon.
also attached screenshots
Thank you in advance
FreeNAS Shows
also attached screenshots
Thank you in advance
Code:
# CUSTOMS # Intel Wellsburg AHCI Controller 8086 8d02 d3d0 false 8086 8d62 d3d0 false # /CUSTOMS # Intel 82579LM Gig NIC can be reset with d3d0 8086 1502 d3d0 default # Intel 82598 10Gig cards can be reset with d3d0 8086 10b6 d3d0 default 8086 10c6 d3d0 default 8086 10c7 d3d0 default 8086 10c8 d3d0 default 8086 10dd d3d0 default # Broadcom 57710/57711/57712 10Gig cards are not shareable 14e4 164e default false 14e4 164f default false 14e4 1650 default false 14e4 1662 link false # Qlogic 8Gb FC card can not be shared 1077 2532 default false # LSILogic 1068 based SAS controllers 1000 0056 d3d0 default 1000 0058 d3d0 default # NVIDIA 10de ffff bridge false
FreeNAS Shows
[root@freenas ~]# camcontrol devlis
<VMware Virtual disk 2.0> at scbus2 target 0 lun 0 (pass0,da0)
<SanDisk Cruzer Glide 1.00> at scbus4 target 0 lun 0 (pass1,da1)