Setup
I had 1 of spare drives in the pool showing UNAVL, so I removed it from the pool in Web UI, but after few hours poking into Web UI, could not find any way to add it back.. and next I probably did something stupid, so I think I should pause and ask for HELP
I jumped into command line and added that drive back
When.. I run scrub from Web UI and server crashed.. even since it has been constantly rebooting (assuming when it tries to mount a pool).
I was able to boot in Safe Mode with single user, so if I try to import zpool in there it crashes the server right away, w/o any messages. If I try to mount it with `-o readonly=on` seems like I see the pool
my suspicion that spare I imported does not look right and that the cause of problem, but not sure how I can remove it if I can only import that pool as readonly.
Code:
TrueNAS-12.0-U2.1 Dell R730xd CPU: 2 x Intel(R) Xeon(R) CPU E5-2650L v3 @ 1.80GHz Memory: 128GB ECC Dell HBA330 mini (IT mode) Disks: 2 x 250GB 12Gb/s SAS SSD 14 x 1.9TB 12Gb/s SAS SSD 2 x 512GB NVMe SSD Network: LACP - 2 x 40Gbe Mellanox MT27500 [ConnectX-3]
I had 1 of spare drives in the pool showing UNAVL, so I removed it from the pool in Web UI, but after few hours poking into Web UI, could not find any way to add it back.. and next I probably did something stupid, so I think I should pause and ask for HELP
I jumped into command line and added that drive back
Code:
zpool add z2 da13
When.. I run scrub from Web UI and server crashed.. even since it has been constantly rebooting (assuming when it tries to mount a pool).
I was able to boot in Safe Mode with single user, so if I try to import zpool in there it crashes the server right away, w/o any messages. If I try to mount it with `-o readonly=on` seems like I see the pool
my suspicion that spare I imported does not look right and that the cause of problem, but not sure how I can remove it if I can only import that pool as readonly.
Last edited: