trey22
Dabbler
- Joined
- Apr 11, 2013
- Messages
- 28
System specs:
FreeNAS 11.3 / Intel G3220 3.0GHz / Kingston 2 x 8GB ECC / ASRock E3C224D2I / 4 x Toshiba 2TB (RAIDZ2), A-Data 32GB USB / Corsair CX430 / Fractal Design Node 304 / APC BR1000G Pro UPS
Drives are from 2013/2014.
According to reporting, issues w/ 2 of my 4 drives:
1. Device: /dev/ada0, 1 Offline uncorrectable sectors
Device: /dev/ada0, 7 Offline uncorrectable sectors
Device: /dev/ada0, 25 Offline uncorrectable sectors
2. Device: /dev/ada2, ATA error count increased from 178 to 179
Device: /dev/ada2, Read SMART Error Log Failed.
Device: /dev/ada2, not capable of SMART self-check.
Smart tests set up as follows:
Output of drives w/ errors:
What info do you need to help troubleshoot? Or is this a case of two bad drives and they need replacement?
FreeNAS 11.3 / Intel G3220 3.0GHz / Kingston 2 x 8GB ECC / ASRock E3C224D2I / 4 x Toshiba 2TB (RAIDZ2), A-Data 32GB USB / Corsair CX430 / Fractal Design Node 304 / APC BR1000G Pro UPS
Drives are from 2013/2014.
According to reporting, issues w/ 2 of my 4 drives:
1. Device: /dev/ada0, 1 Offline uncorrectable sectors
Device: /dev/ada0, 7 Offline uncorrectable sectors
Device: /dev/ada0, 25 Offline uncorrectable sectors
2. Device: /dev/ada2, ATA error count increased from 178 to 179
Device: /dev/ada2, Read SMART Error Log Failed.
Device: /dev/ada2, not capable of SMART self-check.
Smart tests set up as follows:
Output of drives w/ errors:
Code:
Warning: settings changed through the CLI are not written to
the configuration database and will be reset on reboot.
root@freenas:~ # smartctl -a /dev/ada0
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA200
Serial Number: Y2Q4WR6AS
LU WWN Device Id: 5 000039 ff3c23987
Firmware Version: MX4OABB0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jun 11 07:25:22 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15683) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 262) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 077 077 016 Pre-fail Always - 11732063
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 72
3 Spin_Up_Time 0x0007 126 126 024 Pre-fail Always - 299 (Average 300)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 279
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 2
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 091 091 000 Old_age Always - 64326
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 279
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 737
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 737
194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 12/42)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 96
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 70 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 70 occurred at disk power-on lifetime: 64085 hours (2670 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 88 08 9d 10 06 Error: UNC at LBA = 0x06109d08 = 101752072
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 90 a8 10 40 00 4d+15:01:34.809 READ FPDMA QUEUED
60 00 78 90 a7 10 40 00 4d+15:01:34.809 READ FPDMA QUEUED
60 00 70 90 a6 10 40 00 4d+15:01:34.809 READ FPDMA QUEUED
60 00 68 90 a5 10 40 00 4d+15:01:34.809 READ FPDMA QUEUED
60 00 60 90 a4 10 40 00 4d+15:01:34.809 READ FPDMA QUEUED
Error 69 occurred at disk power-on lifetime: 64085 hours (2670 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 88 08 9d 10 06 Error: UNC at LBA = 0x06109d08 = 101752072
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 90 a8 10 40 00 4d+15:01:30.966 READ FPDMA QUEUED
60 00 08 90 a7 10 40 00 4d+15:01:30.966 READ FPDMA QUEUED
60 00 00 90 a6 10 40 00 4d+15:01:30.966 READ FPDMA QUEUED
60 00 f8 90 a5 10 40 00 4d+15:01:30.966 READ FPDMA QUEUED
60 00 f0 90 a4 10 40 00 4d+15:01:30.966 READ FPDMA QUEUED
Error 68 occurred at disk power-on lifetime: 64085 hours (2670 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 88 08 9d 10 06 Error: UNC at LBA = 0x06109d08 = 101752072
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 a0 90 a8 10 40 00 4d+15:01:27.123 READ FPDMA QUEUED
60 00 98 90 a7 10 40 00 4d+15:01:27.123 READ FPDMA QUEUED
60 00 90 90 a6 10 40 00 4d+15:01:27.123 READ FPDMA QUEUED
60 00 88 90 a5 10 40 00 4d+15:01:27.123 READ FPDMA QUEUED
60 00 80 90 a4 10 40 00 4d+15:01:27.123 READ FPDMA QUEUED
Error 67 occurred at disk power-on lifetime: 64085 hours (2670 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 88 08 9d 10 06 Error: UNC at LBA = 0x06109d08 = 101752072
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 30 90 a8 10 40 00 4d+15:01:23.280 READ FPDMA QUEUED
60 00 28 90 a7 10 40 00 4d+15:01:23.280 READ FPDMA QUEUED
60 00 20 90 a6 10 40 00 4d+15:01:23.280 READ FPDMA QUEUED
60 00 18 90 a5 10 40 00 4d+15:01:23.280 READ FPDMA QUEUED
60 00 10 90 a4 10 40 00 4d+15:01:23.280 READ FPDMA QUEUED
Error 66 occurred at disk power-on lifetime: 64085 hours (2670 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 88 08 9d 10 06 Error: UNC at LBA = 0x06109d08 = 101752072
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 90 a8 10 40 00 4d+15:01:19.452 READ FPDMA QUEUED
60 00 b8 90 a7 10 40 00 4d+15:01:19.452 READ FPDMA QUEUED
60 00 b0 90 a6 10 40 00 4d+15:01:19.452 READ FPDMA QUEUED
60 00 a8 90 a5 10 40 00 4d+15:01:19.451 READ FPDMA QUEUED
60 00 a0 90 a4 10 40 00 4d+15:01:19.451 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 57640 -
# 2 Short offline Completed without error 00% 57634 -
# 3 Short offline Completed without error 00% 57466 -
# 4 Extended offline Completed without error 00% 57304 -
# 5 Short offline Completed without error 00% 57298 -
# 6 Short offline Completed without error 00% 57131 -
# 7 Short offline Completed without error 00% 57058 -
# 8 Extended offline Completed without error 00% 56895 -
# 9 Short offline Completed without error 00% 56890 -
#10 Short offline Completed without error 00% 56758 -
#11 Extended offline Completed without error 00% 56593 -
#12 Short offline Completed without error 00% 56588 -
#13 Short offline Completed without error 00% 56422 -
#14 Short offline Completed without error 00% 56373 -
#15 Extended offline Completed without error 00% 56211 -
#16 Short offline Completed without error 00% 56205 -
#17 Short offline Completed without error 00% 56038 -
#18 Extended offline Completed without error 00% 55875 -
#19 Short offline Completed without error 00% 55869 -
#20 Short offline Completed without error 00% 55712 -
#21 Short offline Completed without error 00% 55639 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testingCode:
root@freenas:~ #
root@freenas:~ # smartctl -a /dev/ada2
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA200
Serial Number: 23ON4HAGS
LU WWN Device Id: 5 000039 ff3c9284b
Firmware Version: MX4OABB0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jun 11 07:42:25 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15204) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 254) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 076 076 016 Pre-fail Always - 10683924
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 72
3 Spin_Up_Time 0x0007 128 128 024 Pre-fail Always - 296 (Average 296)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 109
5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 2004
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 092 092 000 Old_age Always - 60106
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 533
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 533
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 11/47)
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 2257
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 302 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 302 occurred at disk power-on lifetime: 59867 hours (2494 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 98 70 b7 42 06 Error: UNC at LBA = 0x0642b770 = 105035632
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 f8 80 10 bf 42 40 00 4d+16:49:42.622 READ FPDMA QUEUED
60 00 78 10 be 42 40 00 4d+16:49:42.622 READ FPDMA QUEUED
60 00 70 10 bd 42 40 00 4d+16:49:42.622 READ FPDMA QUEUED
60 00 68 10 bc 42 40 00 4d+16:49:42.622 READ FPDMA QUEUED
60 00 60 10 bb 42 40 00 4d+16:49:42.622 READ FPDMA QUEUED
Error 301 occurred at disk power-on lifetime: 59867 hours (2494 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 88 18 38 41 06 Error: UNC at LBA = 0x06413818 = 104937496
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 f8 30 98 41 41 40 00 4d+16:49:12.434 READ FPDMA QUEUED
60 00 28 98 40 41 40 00 4d+16:49:12.434 READ FPDMA QUEUED
60 00 20 98 3f 41 40 00 4d+16:49:12.434 READ FPDMA QUEUED
60 00 18 98 3e 41 40 00 4d+16:49:12.434 READ FPDMA QUEUED
60 00 10 98 3d 41 40 00 4d+16:49:12.434 READ FPDMA QUEUED
Error 300 occurred at disk power-on lifetime: 59867 hours (2494 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 88 18 38 41 06 Error: UNC at LBA = 0x06413818 = 104937496
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 f8 d0 98 41 41 40 00 4d+16:49:08.698 READ FPDMA QUEUED
60 00 c8 98 40 41 40 00 4d+16:49:08.698 READ FPDMA QUEUED
60 00 c0 98 3f 41 40 00 4d+16:49:08.698 READ FPDMA QUEUED
60 00 b8 98 3e 41 40 00 4d+16:49:08.698 READ FPDMA QUEUED
60 00 b0 98 3d 41 40 00 4d+16:49:08.698 READ FPDMA QUEUED
Error 299 occurred at disk power-on lifetime: 59465 hours (2477 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 40 78 06 b2 08 Error: UNC at LBA = 0x08b20678 = 145884792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 70 80 48 06 b2 40 00 10:09:27.740 READ FPDMA QUEUED
61 18 78 38 ff af 40 00 10:09:27.740 WRITE FPDMA QUEUED
2f 00 01 10 00 00 00 00 10:09:27.739 READ LOG EXT
60 70 68 48 06 b2 40 00 10:09:15.538 READ FPDMA QUEUED
61 18 60 38 ff af 40 00 10:09:15.538 WRITE FPDMA QUEUED
Error 298 occurred at disk power-on lifetime: 59465 hours (2477 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 40 78 06 b2 08 Error: UNC at LBA = 0x08b20678 = 145884792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 70 68 48 06 b2 40 00 10:09:15.538 READ FPDMA QUEUED
61 18 60 38 ff af 40 00 10:09:15.538 WRITE FPDMA QUEUED
ef 02 00 00 00 00 40 00 10:09:15.538 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 40 00 10:09:15.537 SET FEATURES [Enable read look-ahead]
c6 00 10 00 00 00 40 00 10:09:15.537 SET MULTIPLE MODE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 80% 53417 -
# 2 Short offline Completed without error 00% 53415 -
# 3 Short offline Interrupted (host reset) 50% 53248 -
# 4 Extended offline Interrupted (host reset) 80% 53082 -
# 5 Short offline Completed without error 00% 53079 -
# 6 Short offline Completed without error 00% 52912 -
# 7 Short offline Completed without error 00% 52839 -
# 8 Extended offline Completed without error 00% 52676 -
# 9 Short offline Completed without error 00% 52671 -
#10 Short offline Completed without error 00% 52538 -
#11 Extended offline Completed without error 00% 52374 -
#12 Short offline Completed without error 00% 52369 -
#13 Short offline Completed without error 00% 52203 -
#14 Short offline Completed without error 00% 52154 -
#15 Extended offline Completed without error 00% 51991 -
#16 Short offline Completed without error 00% 51986 -
#17 Short offline Completed without error 00% 51819 -
#18 Extended offline Completed without error 00% 51655 -
#19 Short offline Completed without error 00% 51650 -
#20 Short offline Completed without error 00% 51492 -
#21 Short offline Completed without error 00% 51419 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testingWhat info do you need to help troubleshoot? Or is this a case of two bad drives and they need replacement?
Last edited:
