FreeBruce
Cadet
- Joined
- Jul 10, 2020
- Messages
- 7
OS Version:
FreeNAS-11.2-U6
(Build Date: Sep 17, 2019 0:16)
HP ProLiant Microserver Gen 8
Processor:
Intel(R) Celeron(R) CPU G1610T @ 2.30GHz (2 cores)
Memory:
16 GiB
Setup:
4x 1.36TB Samsung HDD's in a RAID5 setting (ada0,ada1,ada2,ada3)
Boot Pool on ada4
Grub Loader on da0 (needed to be able to boot from ada4 without the use of Hardware-RAID [Gen8-Specific] )
Overall Status:
Device: /dev/ada2, Self-Test Log error count increased from 8 to 9
Device: /dev/ada3, Self-Test Log error count increased from 4 to 5
Device: /dev/ada3, 1 Offline uncorrectable sectors
Device: /dev/ada2, 1 Offline uncorrectable sectors
Device: /dev/ada2, 2 Currently unreadable (pending) sectors
Smartctl for ada2:
Smartctl for ada3:
------------------------------------------------------------------------------------------------------------------
Hello everyone,
ten days ago I started getting security run outputs with the following message:
freenas.local kernel log messages:
arp: packet with invalid ethernet address length 0 received on bge0
arp: packet with invalid ethernet address length 0 received on bge0
-- End of security output --
In this example I have two arp log messages – that was on the first day. The days after that it would be more, sometimes up to 11 times,
and always with the exact same log message.
The server is connected to the Internet, and it now runs for about a little less then a year – but I can't recall of ever having a
security output like that one.
As mentioned in the overall status above, the disks in my RAID seem to be slowly dying.
I don't know if this has something to do with it – since the output seems to have not – but I thought I'll include it also, just to give you a full picture of the situation.
When using arp -a, I don't see devices, that shouldn't be there.
In the ifconfig I couldn't find anything, that would lead to the problem:
On the web I found next to nothing regarding this log message, and nothing on how to solve it.
Thanks to everyone in advance for helping me on this one.
Best regards,
FreeBruce
FreeNAS-11.2-U6
(Build Date: Sep 17, 2019 0:16)
HP ProLiant Microserver Gen 8
Processor:
Intel(R) Celeron(R) CPU G1610T @ 2.30GHz (2 cores)
Memory:
16 GiB
Setup:
4x 1.36TB Samsung HDD's in a RAID5 setting (ada0,ada1,ada2,ada3)
Boot Pool on ada4
Grub Loader on da0 (needed to be able to boot from ada4 without the use of Hardware-RAID [Gen8-Specific] )
Overall Status:
Device: /dev/ada2, Self-Test Log error count increased from 8 to 9
Device: /dev/ada3, Self-Test Log error count increased from 4 to 5
Device: /dev/ada3, 1 Offline uncorrectable sectors
Device: /dev/ada2, 1 Offline uncorrectable sectors
Device: /dev/ada2, 2 Currently unreadable (pending) sectors
Smartctl for ada2:
Code:
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 099 051 - 57 3 Spin_Up_Time POS--- 073 073 011 - 8780 4 Start_Stop_Count -O--CK 092 092 000 - 8168 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 2 8 Seek_Time_Performance P-S--K 100 100 015 - 12978 9 Power_On_Hours -O--CK 086 086 000 - 70424 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 16 12 Power_Cycle_Count -O--CK 100 100 000 - 202 13 Read_Soft_Error_Rate -OSR-- 100 099 000 - 56 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 503 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 075 056 000 - 25 (Min/Max 16/26) 194 Temperature_Celsius -O---K 075 055 000 - 25 (Min/Max 16/28) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 268752977 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 2 198 Offline_Uncorrectable ----CK 100 100 000 - 1 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 099 099 000 - 1 SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 70% 4877 557853748 # 2 Short offline Completed: read failure 20% 4802 2757152908 # 3 Short offline Completed: read failure 20% 4586 2757152907 # 4 Short offline Completed: read failure 20% 4418 2757152907 # 5 Extended offline Completed: read failure 90% 4395 2757152907 # 6 Short offline Completed: read failure 20% 4253 2757152908 # 7 Extended offline Completed: read failure 50% 4161 1121334378 # 8 Short offline Completed without error 00% 4085 - # 9 Short offline Completed without error 00% 3845 - #10 Short offline Completed without error 00% 3677 - #11 Extended offline Completed: read failure 50% 3658 1216029813 #12 Short offline Completed without error 00% 3509 - #13 Extended offline Completed: read failure 50% 3418 1216029813 #14 Short offline Completed without error 00% 3341 - #15 Short offline Completed without error 00% 3125 - #16 Short offline Completed without error 00% 2957 - #17 Extended offline Completed: read failure 50% 2938 1216029813 #18 Short offline Completed without error 00% 2789 - #19 Extended offline Completed: read failure 50% 2698 1216029813 #20 Short offline Completed without error 00% 2621 - #21 Short offline Completed without error 00% 2382 -
Smartctl for ada3:
Code:
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 099 051 - 57 3 Spin_Up_Time POS--- 073 073 011 - 8780 4 Start_Stop_Count -O--CK 092 092 000 - 8168 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 2 8 Seek_Time_Performance P-S--K 100 100 015 - 12978 9 Power_On_Hours -O--CK 086 086 000 - 70424 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 16 12 Power_Cycle_Count -O--CK 100 100 000 - 202 13 Read_Soft_Error_Rate -OSR-- 100 099 000 - 56 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 503 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 075 056 000 - 25 (Min/Max 16/26) 194 Temperature_Celsius -O---K 075 055 000 - 25 (Min/Max 16/28) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 268752977 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 2 198 Offline_Uncorrectable ----CK 100 100 000 - 1 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 099 099 000 - 1 SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 70% 4877 557853748 # 2 Short offline Completed: read failure 20% 4802 2757152908 # 3 Short offline Completed: read failure 20% 4586 2757152907 # 4 Short offline Completed: read failure 20% 4418 2757152907 # 5 Extended offline Completed: read failure 90% 4395 2757152907 # 6 Short offline Completed: read failure 20% 4253 2757152908 # 7 Extended offline Completed: read failure 50% 4161 1121334378 # 8 Short offline Completed without error 00% 4085 - # 9 Short offline Completed without error 00% 3845 - #10 Short offline Completed without error 00% 3677 - #11 Extended offline Completed: read failure 50% 3658 1216029813 #12 Short offline Completed without error 00% 3509 - #13 Extended offline Completed: read failure 50% 3418 1216029813 #14 Short offline Completed without error 00% 3341 - #15 Short offline Completed without error 00% 3125 - #16 Short offline Completed without error 00% 2957 - #17 Extended offline Completed: read failure 50% 2938 1216029813 #18 Short offline Completed without error 00% 2789 - #19 Extended offline Completed: read failure 50% 2698 1216029813 #20 Short offline Completed without error 00% 2621 - #21 Short offline Completed without error 00% 2382 -
------------------------------------------------------------------------------------------------------------------
Hello everyone,
ten days ago I started getting security run outputs with the following message:
freenas.local kernel log messages:
arp: packet with invalid ethernet address length 0 received on bge0
arp: packet with invalid ethernet address length 0 received on bge0
-- End of security output --
In this example I have two arp log messages – that was on the first day. The days after that it would be more, sometimes up to 11 times,
and always with the exact same log message.
The server is connected to the Internet, and it now runs for about a little less then a year – but I can't recall of ever having a
security output like that one.
As mentioned in the overall status above, the disks in my RAID seem to be slowly dying.
I don't know if this has something to do with it – since the output seems to have not – but I thought I'll include it also, just to give you a full picture of the situation.
When using arp -a, I don't see devices, that shouldn't be there.
In the ifconfig I couldn't find anything, that would lead to the problem:
Code:
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE> ether 1c:98:ec:0f:96:74 hwaddr 1c:98:ec:0f:96:74 inet 192.168.1.30 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet autoselect (1000baseT <full-duplex>) status: active
On the web I found next to nothing regarding this log message, and nothing on how to solve it.
Thanks to everyone in advance for helping me on this one.
Best regards,
FreeBruce