VioletDragon
Patron
- Joined
- Aug 6, 2017
- Messages
- 251
Hi folks,
Last night when my server ran a scrub and backed up to my offsite server i had a email from my server about /dev/da1 [SAT], 8 Offline uncorrectable sectors. Is this a bad thing? does it mean that my disk is dying? I have ran
Any recommendations?
Thanks.
Last night when my server ran a scrub and backed up to my offsite server i had a email from my server about /dev/da1 [SAT], 8 Offline uncorrectable sectors. Is this a bad thing? does it mean that my disk is dying? I have ran
smartctl -q noserial -a /dev/da1
via SSH. The output I am getting isCode:
=== START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1ER166 Firmware Version: CC26 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Mar 1 17:16:56 2018 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 80) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 313) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 171354096 3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 142 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 074 060 030 Pre-fail Always - 25616206 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12511 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 182 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 063 063 000 Old_age Always - 37 190 Airflow_Temperature_Cel 0x0022 071 046 045 Old_age Always - 29 (Min/Max 27/30) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53 193 Load_Cycle_Count 0x0032 022 022 000 Old_age Always - 157894 194 Temperature_Celsius 0x0022 029 054 000 Old_age Always - 29 (0 15 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4438h+10m+58.387s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 137096222233 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 63285713472 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11548 - # 2 Short offline Completed without error 00% 11547 - # 3 Short offline Completed without error 00% 11546 - # 4 Short offline Completed without error 00% 11545 - # 5 Short offline Completed without error 00% 11544 - # 6 Short offline Completed without error 00% 11543 - # 7 Short offline Completed without error 00% 11542 - # 8 Short offline Completed without error 00% 11541 - # 9 Short offline Completed without error 00% 11541 - #10 Short offline Completed without error 00% 11540 - #11 Short offline Completed without error 00% 11539 - #12 Short offline Completed without error 00% 11537 - #13 Short offline Completed without error 00% 11536 - #14 Short offline Completed without error 00% 11535 - #15 Short offline Completed without error 00% 11534 - #16 Short offline Completed without error 00% 11533 - #17 Short offline Completed without error 00% 11532 - #18 Short offline Completed without error 00% 11531 - #19 Short offline Completed without error 00% 11530 - #20 Short offline Completed without error 00% 11529 - #21 Short offline Completed without error 00% 11528 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Any recommendations?
Thanks.
Last edited by a moderator: