dilod97118
Cadet
- Joined
- Aug 7, 2020
- Messages
- 4
Hello, I've just finished installing FreeNAS on my new NAS box. Everything worked flawlessly until I tried scrubbing the boot pool. I tried reinstalling the system 3 times, used different flash drives. I checked the ISO file's checksum too.
The system has 32TB of storage (in RAID-Z2) and 16GB of ECC-RAM.
This is the output of 'zpool status -vx':
The system SSD is a new 120 GB Western Digital Green mSata drive (WDS120G2G0B).
What is the source of this problem?
Is there any way for me to fix it?
Thanks
The system has 32TB of storage (in RAID-Z2) and 16GB of ECC-RAM.
This is the output of 'zpool status -vx':
Code:
pool: freenas-boot state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://illumos.org/msg/ZFS-8000-8A scan: scrub repaired 0 in 0 days 00:00:03 with 18 errors on Thu Aug 7 15:25:58 2020 config: NAME STATE READ WRITE CKSUM freenas-boot DEGRADED 0 0 27 ada4p2 DEGRADED 0 0 54 too many errors errors: Permanent errors have been detected in the following files: <metadata>:<0x2c> <metadata>:<0x44> <metadata>:<0x7e> <metadata>:<0x8f> <metadata>:<0x90> <metadata>:<0x92> <metadata>:<0x93> freenas-boot/ROOT/default:<0x0> //root/.zsh-histfile freenas-boot/ROOT/default@2020-08-07-11:14:56:/usr/local/lib/python3.7/site-packages/onedrivesdk/request/__pycache__/permission_request_builder.cpython-37.opt-1.pyc freenas-boot/ROOT/default@2020-08-07-11:14:56:/usr/local/lib/python3.7/site-packages/asyncssh/__pycache__/pattern.cpython-37.opt-1.pyc
The system SSD is a new 120 GB Western Digital Green mSata drive (WDS120G2G0B).
What is the source of this problem?
Is there any way for me to fix it?
Thanks