Christopher Joyson
Contributor
- Joined
- May 22, 2014
- Messages
- 105
Has anyone made a complete tutorial on the install of plugins from the GUI, i.e clicking on the plugins and letting them install themselves in FreeNAS 11.
I had mine running in FreeNAS 9.3 but cannot keep them going in FreeNAS 11.
I am Running FreeNAS-11.1-RELEASE. Address 192.168.0.21
How I set mine up
I have a jails Dataset “Jailset” . in Jails Configuration I have “/mnt/Nas_Volume/Jailset”.
Ip4 Network “192.168.0.0/24”
Network Start Address “192.168.0.30”
Network End Address “192.168.0.40”
Collection URL: http://download.freenas.org/latest/RELEASE/x64/jails
So I set up the Plugins by Doing SABNZBD First, the address SABNZBD takes is “http://192.168.0.30:8080/sabnzbd/”. I then make two Storage points:
Source “/mnt/Nas_Volume/Media/Complete” Destination “/media/Complete” for Completed Downloads
Source “/mnt/Nas_Volume/Media/NZB” Destination “/media/NZB” for Manually downloaded NZB files.
Then I Add Sonarr Via the plugins Tab Sheet.
The address Sonarr takes is http://192.168.0.31:8989/. I then make two Storage points:
Source “/mnt/Nas_Volume/Media/TV_Shows “, Destination “/media/TV_Shows” for my TV Shows folder
Source “/mnt/Nas_Volume/Media/Complete” Destination “/media/Complete” for completed files from SABNZBD.
Finally I added Couchpotato via the plugins tab:
The address Couchpotato takes is http://192.168.0.32:5050/. I then make two Storage points:
Source “/mnt/Nas_Volume/Media/Movies “, Destination “/media/Movies” for my Movie folder
Source “/mnt/Nas_Volume/Media/Complete” Destination “/media/Complete” for completed files from SABNZBD.
I have assigned user group and user name “Media” with an UID as 816 as I could not assign “media” as this is already taken.
After I have made the jails I then go to storage and assign the individual jails to “Media” not the whole “Jailset”. I give the Owner , Group, Other to all access Read, Write & Execute.
So the problem is I get them to work, but they are not as good as they were before, and after a couple of days they stop by themselves and don’t restart, sometimes it all of them, sometimes is just one or two.
When I tr to restart through the GUI nothing happens when I try through the shell I get
Does anyone know where I’m going wrong.
I know they say doing the same thing over and over again and expecting a different result is the definition of insane, and this is definitely sending me insane.
I had mine running in FreeNAS 9.3 but cannot keep them going in FreeNAS 11.
I am Running FreeNAS-11.1-RELEASE. Address 192.168.0.21
How I set mine up
I have a jails Dataset “Jailset” . in Jails Configuration I have “/mnt/Nas_Volume/Jailset”.
Ip4 Network “192.168.0.0/24”
Network Start Address “192.168.0.30”
Network End Address “192.168.0.40”
Collection URL: http://download.freenas.org/latest/RELEASE/x64/jails
So I set up the Plugins by Doing SABNZBD First, the address SABNZBD takes is “http://192.168.0.30:8080/sabnzbd/”. I then make two Storage points:
Source “/mnt/Nas_Volume/Media/Complete” Destination “/media/Complete” for Completed Downloads
Source “/mnt/Nas_Volume/Media/NZB” Destination “/media/NZB” for Manually downloaded NZB files.
Then I Add Sonarr Via the plugins Tab Sheet.
The address Sonarr takes is http://192.168.0.31:8989/. I then make two Storage points:
Source “/mnt/Nas_Volume/Media/TV_Shows “, Destination “/media/TV_Shows” for my TV Shows folder
Source “/mnt/Nas_Volume/Media/Complete” Destination “/media/Complete” for completed files from SABNZBD.
Finally I added Couchpotato via the plugins tab:
The address Couchpotato takes is http://192.168.0.32:5050/. I then make two Storage points:
Source “/mnt/Nas_Volume/Media/Movies “, Destination “/media/Movies” for my Movie folder
Source “/mnt/Nas_Volume/Media/Complete” Destination “/media/Complete” for completed files from SABNZBD.
I have assigned user group and user name “Media” with an UID as 816 as I could not assign “media” as this is already taken.
After I have made the jails I then go to storage and assign the individual jails to “Media” not the whole “Jailset”. I give the Owner , Group, Other to all access Read, Write & Execute.
So the problem is I get them to work, but they are not as good as they were before, and after a couple of days they stop by themselves and don’t restart, sometimes it all of them, sometimes is just one or two.
When I tr to restart through the GUI nothing happens when I try through the shell I get
Code:
root@sonarr_1:/ # service sonarr start Starting sonarr. login class 'daemon' non-existent, using default su: pam_start: system error /usr/local/etc/rc.d/sonarr: WARNING: failed to start sonarr root@sonarr_1:/ #
Does anyone know where I’m going wrong.
I know they say doing the same thing over and over again and expecting a different result is the definition of insane, and this is definitely sending me insane.
Last edited by a moderator: