Wallybanger
Contributor
- Joined
- Apr 17, 2016
- Messages
- 150
Ugghh, so after hours of computer building my box won't power up for the smoke test.
When I turn the PS switch on a green LED lights up on the motherboard. When I push the power button on the case the cpu fan BARELY moves (maybe 1/8 of a rotation) and then the green power LED on the board starts flashing.
There is nothing in the manual explaining what's going on.
Build:
Supermicro X11SSH-LN4F
Intel Xeon E3-1230 v5
2X Kingston ValueRAM 16GBDDR4 2133 Server Memory ECC DIMM (288-Pin) KVR21E15D8/16
SeaSonic SSR-650RM 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
8X Seagate 4TB NAS drives
I used an anti static mat and wrist band while building. I can't see any shorts or problems.
Any ideas?
When I turn the PS switch on a green LED lights up on the motherboard. When I push the power button on the case the cpu fan BARELY moves (maybe 1/8 of a rotation) and then the green power LED on the board starts flashing.
There is nothing in the manual explaining what's going on.
Build:
Supermicro X11SSH-LN4F
Intel Xeon E3-1230 v5
2X Kingston ValueRAM 16GBDDR4 2133 Server Memory ECC DIMM (288-Pin) KVR21E15D8/16
SeaSonic SSR-650RM 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
8X Seagate 4TB NAS drives
I used an anti static mat and wrist band while building. I can't see any shorts or problems.
Any ideas?