thedirtmerchant
Patron
- Joined
- Jun 26, 2012
- Messages
- 260
Not sure what the problem is (obvi).
On/Around July 14th I replaced 2 drives (ada3 and ada5) and
On July 15th Short tests were run (report output screenshotted)
But, week by week, the "Last Test Age" increases for the new drives, and SMART tests are run on the other drives.
Did I miss a setting somewhere?
Short & Long Tests are scheduled for all drives, including ada3 and ada5. And SMART tests are enabled.
On/Around July 14th I replaced 2 drives (ada3 and ada5) and
On July 15th Short tests were run (report output screenshotted)
Device | Serial Number | SMART Status | Temperature | Power-On Hours | Start/Stop Count | Spin Retry Count | Reallocated Sectors | Reallocation Events | Current Pending Sectors | Offline Uncorrectable Sectors | UltraDMA CRC Errors | Seek Error Health | Last Test Age (days) | Last Test Type |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SMART Status Report Summary | ||||||||||||||
/dev/ada1 | WD-WCC4N1ZK03JV | PASSED | 30��C | 35202 | 50 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
/dev/ada2 | WD-WCC4N2VRX064 | PASSED | 31��C | 35202 | 50 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
/dev/ada3 | WD-WX51D89KS166 | PASSED | 27��C | 799 | 7 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
/dev/ada4 | WD-WCC4N2YJV3S8 | PASSED | 27��C | 15443 | 20 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
/dev/ada5 | WD-WX61D89A8U87 | PASSED | 27��C | 799 | 7 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
/dev/da0 | WD-WCC4N1ZK0HKS | PASSED | 28��C | 35202 | 51 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
But, week by week, the "Last Test Age" increases for the new drives, and SMART tests are run on the other drives.
Did I miss a setting somewhere?
Device | Serial Number | SMART Status | Temperature | Power-On Hours | Start/Stop Count | Spin Retry Count | Reallocated Sectors | Reallocation Events | Current Pending Sectors | Offline Uncorrectable Sectors | UltraDMA CRC Errors | Seek Error Health | Last Test Age (days) | Last Test Type |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SMART Status Report Summary | ||||||||||||||
/dev/ada1 | WD-WCC4N1ZK03JV | PASSED | 31��C | 36113 | 50 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
/dev/ada2 | WD-WCC4N2VRX064 | PASSED | 31��C | 36114 | 50 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
/dev/ada3 | WD-WX51D89KS166 | PASSED | 27��C | 1710 | 7 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 39 | Short |
/dev/ada4 | WD-WCC4N2YJV3S8 | PASSED | 27��C | 16354 | 20 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
/dev/ada5 | WD-WX61D89A8U87 | PASSED | 26��C | 1710 | 7 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 39 | Short |
/dev/da0 | WD-WCC4N1ZK0HKS | PASSED | 28��C | 36113 | 51 | 0 | 0 | 0 | 0 | 0 | 0 | 200% | 1 | Short |
Short & Long Tests are scheduled for all drives, including ada3 and ada5. And SMART tests are enabled.