lexxai
Dabbler
- Joined
- Nov 9, 2016
- Messages
- 33
I create VM machine with freebsd on FreeNAS and want run inside vm PPPOE server.
But tap interface can't see any packets of ether type 0x8863.
Where it can be ?
ifconfig
At HOST:
Inside of VM:
tcpdump
result OK
result OK
result noting
But tap interface can't see any packets of ether type 0x8863.
Where it can be ?
ifconfig
At HOST:
Code:
ifconfig bridge2 bridge2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000 ether 02:a2:bf:XX:XX:XX nd6 options=1<PERFORMNUD> groups: bridge id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: tap1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 16 priority 128 path cost 2000000 member: lagg0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 6 priority 128 path cost 10000
Inside of VM:
Code:
vtnet1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 9000 options=80028<VLAN_MTU,JUMBO_MTU,LINKSTATE> ether 00:a0:98:XX:XX:XX hwaddr 00:a0:98:XX:XX:XX inet6 fe80::2a0:98XX:XXXX:1664%vtnet1 prefixlen 64 scopeid 0x2 inet 172.16.XX.XX netmask 0xffffff00 broadcast 172.16.XX.255 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet 10Gbase-T <full-duplex> status: active
tcpdump
Code:
>tcpdump -i bridge2 -e ether proto 0x8863 04:09:28.994923 d8:50:e6:41:XX:XX (oui Unknown) > Broadcast, ethertype PPPoE D (0x8863), length 96: PPPoE PADI [Service-Name] [Host-Uniq 0x210000000000000036000000]
result OK
Code:
tcpdump -i lagg0 -e ether proto 0x8863 04:13:25.107190 d8:50:e6:41:XX:XX (oui Unknown) > Broadcast, ethertype PPPoE D (0x8863), length 96: PPPoE PADI [Service-Name] [Host-Uniq 0x23000000000000003A000000]
result OK
Code:
> tcpdump -i tap1 -e ether proto 0x8863
result noting
Last edited: