I create VM machine with freebsd on FreeNAS and want run inside vm PPPOE server. But tap interface can't see any packets of ether type 0x8863. Where it can be ? ifconfig At HOST: ifconfig bridge2 bridge2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000 ether...

I want do isolate jail from jail by bridge private feature. I try set script as poststart option to jail: iocage set exec_poststart=/root/test/pstart.sh foo /root/test/pstart.sh: #!/bin/sh ifconfig bridge0 | grep member: |grep -v PRIVATE | awk '{ print $2 }' | grep 'vnet' | xargs ifconfig...

I feel like this was discussed before, in relation to iocage networking, but I didn't quite follow and now I can't find what I thought I saw. Here's my situation: I have two working warden jails and one broken iocage jail. The non-working iocage jail is for OpenVPN and must use the "VNET"...

All, I'm running some bhyve VM's that are all connected to em0, a dedicated interface not having an IP address. Each of these VM's have two vlans configured. Traffic from these vlan's is forwarded nicely with the tag through the tap interface and the bridge to the physical interface em0...

I'm not sure, but someone said my network config could be causing some networking problems (plex & LMS not working 100% in iocage) i have. It seems that there is a bridge installed that shouldn't be there. I have this installation up for about 3 years and maybe its time for a complete clean...

What would the correct way to create a bridge for iocage VNET/VIMAGE to use on igb1? I'm currently doing the following which works but I end up with three bridges. Variable: ifconfig_bridge1 Value: addm igb1 up Type: rc.conf Variable: cloned_interfaces Value: bridge0 bridge1 Type...

So decided to upgrade my FreeNAS to 11.1-U1 and started to recreate my jails using iocage. All went well initially, till after a reboot I appear to have lost em0 on my bridge0. As a result, my new jails (configured with static IP addresses) have no more network connectivity to my LAN. As you...

== SOLUTION ALREADY FOUND (see below) :) == To become more familiar with iocage, I've been trying out a bunch of things using FreeNAS 11.1 that I installed under Virtualbox (Windows guest). FreeNAS VM network config: VBoxManage modifyvm "%VM_NAME%" --nic1 bridged --nictype1 virtio...

I've been having some difficulties with iocage when using VNET. I have experience using iocage on FreeBSD with a shared IP, but never using VNET since I didn't need the functionality at that point. After having some trouble figuring out how to configure a bridge correctly, I have finally...

I downloaded FreeNAS 11 .iso, and tried to run it in VMware Player 14.1.0, using Manjaro linux. The host machine is a Ryzen 1700x with the Asus Prime x370-PRO motherboard. 32 Gigs of ram This has a Intel NIC 26:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)...

So I am building a FreeNAS box for a contract job with the primary usage being a file-sharing and video edit storage machine. The plan is to have an Intel Quad Gig Nic that will be solely for direct connections to the two trashcan mac pros the editors are using. The MoBo port will be for...

Hi all, Sorry if this has already been answered, but I could not find it. I`m using FreeNAS-11.0-U4 (54848d13b) [updated from 9.3] and am trying to create a Windows 10 VM, which all works OK (the OS has installed OK, got networking and can use the VM). However, I have 2 NICs on my FreeNAS...

Hi all, I have a strange problem that I cant seem to figure out. I am attempting to link two R710s(esxi) to a R510(FreeNAS) with a dual 10gbs sfp+ nic. (link to a similar setup) VMware 6.0 expects each host to see a datastore on the same IP in order for DRS/HA to work, which is why the bridge is...

can't start a VM: bridge0 do need a mtu of 9000, because the nic (lagg0 / lacp) has a mtu of 9000. "bridge0: invalid MTU: 9000(lagg0) != 1500" Where can I change the mtu for bridge0? % ifconfig bridge0 bridge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether...

Before I go upstream and start asking for workarounds about my weird VLAN issue, I need to know if there's any special magic iohyve-bridge interface type has that differs from the regular bridge0 type, at least beyond the description. When I ask at the FreeBSD forums, they're bound to want to...

This setup worked fine with a single interface and no VLAN. Current setup is like this: FreeNAS vlan10: 172.16.0.5/24 VM vlan10: 172.16.0.6/24 Some random other host: 172.16.0.10/24 lagg0 no IP up LAGG shows happy on both ends of the connection, both 10GB ports are in the group. Routing table is...

Good afternoon everyone, I will start with a big thanks to all in this forum as reading it has been greatly helpful as I am quite new to FreeNAS. To start I would like to describe my setup slightly... I have a FreeNAS system directly connected to 3 cluster nodes and 1 backup server. The direct...

Hi, I have seen similar questions on this forum but no real solutions that worked for me so I decided to post a new one. Any help appreciated. We are running Freenas 9.10.2-U1 on a Dell R530 with Broadcom Corporation NetXtreme BCM5720 NICs of which only one is connected to the LAN. Interface...