tgrosinger
Cadet
- Joined
- Jan 14, 2015
- Messages
- 5
I have recently been setting up a ASRock C2750D4I and have connected 4 hard drives to the Marvell SE9230 controller. Since I only had 4 drives and I believe RAIDZ2 would only get me the same efficiency as RAID10, I decided to just setup the RAID controller with RAID10.
I enabled S.M.A.R.T. in the BIOS, however when I am logged into the machine it seems to show otherwise:
I setup email notifications and have been receiving one each morning saying:
Though looking at Storage/Volumes shows that Storage1 is HEALTHY. I am sure it is obvious that this is my first time to FreeNAS, but please let me know if there is more information I can provide and any help is greatly appreciated.
I enabled S.M.A.R.T. in the BIOS, however when I am logged into the machine it seems to show otherwise:
Code:
[root@freenas ~]# smartctl -a /dev/ada0 smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p5 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: MARVELL Raid VD 0 Serial Number: 1e107f7399020001 Firmware Version: MV.R00-0 User Capacity: 8,001,406,238,720 bytes [8.00 TB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a Local Time is: Wed Jan 14 20:13:23 2015 PST SMART support is: Unavailable - device lacks SMART capability. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
I setup email notifications and have been receiving one each morning saying:
The volume Storage1 (ZFS) state is ONLINE: One or more devices has experienced an error resulting in data corruption. Applications may be affected.
Though looking at Storage/Volumes shows that Storage1 is HEALTHY. I am sure it is obvious that this is my first time to FreeNAS, but please let me know if there is more information I can provide and any help is greatly appreciated.