CyberPower CP1350PFCLCD UPS

[sonny81]

Judging from the list of drivers under the UPS Services settings, Freenas 8.2 r11950 doesn't directly support the CyberPower CP1350PFCLCD UPS.

I was curious to know if anyone on here has this same UPS and was able to find a reliable work around to make this UPS and Freenas work together.

Thanks so much!!

 

[Stephens]

I use the CP850PFCLCD UPS with 8.2. Just select one close to it (they all pretty much use the same generic driver anyway). And test it. If you want a 5 minute shutdown, unplug the UPS from your power and see if it shuts down in 5 minutes.

Don't let the GUI confuse you because after you select the driver you want to use, it'll display something different. It DOES however use the one you selected.

 

[sonny81]

I use the CP850PFCLCD UPS with 8.2. Just select one close to it (they all pretty much use the same generic driver anyway). And test it. If you want a 5 minute shutdown, unplug the UPS from your power and see if it shuts down in 5 minutes.

Don't let the GUI confuse you because after you select the driver you want to use, it'll display something different. It DOES however use the one you selected.

Thank you Stephens!! I'll set it up now and set it to like 30 seconds or something short for the text.