Can't import/mount zpool in GUI after fresh install to 9.3 following cata failure (my fault)

[Aberu]

I know I should have had backups of my configs originally. Few things...

No the volume wasn't encrypted.

I can navigate the volume like it was there in console, but GUI doesn't recognize them at all. Here's a list of commands I ran to get as much info as I thought relevant and could find based on the internet searches I did before I posted here. Here's from the GUI what I see:

Code:

[root@freenas] /mnt/v1# ls
./        ../       .system/  jails/    media/    owncloud/

As you can see I can navigate to the volume so this would imply that it was automatically imported as per 9.3's wizard at the beginning. Sweet! But wait, I can't see in the GUI so I can't create a CIFS share or do anything with plugins or anything at all! So I decided to check status...

Code:

[root@freenas] /mnt/v1# zpool status
  pool: freenas-boot
 state: ONLINE
  scan: none requested
config:

        NAME        STATE     READ WRITE CKSUM
        freenas-boot  ONLINE       0     0     0
          da0p2     ONLINE       0     0     0

errors: No known data errors

  pool: v1
 state: ONLINE
  scan: scrub repaired 0 in 30h46m with 0 errors on Fri Jan  2 06:46:13 2015
config:

        NAME                                            STATE     READ WRITE CKSUM
        v1                                              ONLINE       0     0     0
          raidz1-0                                      ONLINE       0     0     0
            gptid/757db659-4116-11e4-a123-002590d4bdbb  ONLINE       0     0     0
            gptid/75d77186-4116-11e4-a123-002590d4bdbb  ONLINE       0     0     0
            gptid/7637a646-4116-11e4-a123-002590d4bdbb  ONLINE       0     0     0
            gptid/769a5b3b-4116-11e4-a123-002590d4bdbb  ONLINE       0     0     0

errors: No known data errors

Hrmmm okay everying looks good! Why isn't this working? Maybe it thinks it's imported so it's not?

Code:

[root@freenas] /mnt/v1# zpool import v1
cannot import 'v1': a pool with that name is already created/imported,
and no additional pools with that name were found

So clearly Freenas recognizes that it HAS been imported. WTF? So I saw online something about showing glabel status for more info (dunno why) just in case this helps...

Code:

[root@freenas] /mnt/v1# glabel status
                                      Name  Status  Components
gptid/2a3514cd-a81d-11e4-9e59-002590d4bdbb     N/A  da0p1
gptid/75725812-4116-11e4-a123-002590d4bdbb     N/A  ada0p1
gptid/757db659-4116-11e4-a123-002590d4bdbb     N/A  ada0p2
gptid/75cbb813-4116-11e4-a123-002590d4bdbb     N/A  ada1p1
gptid/75d77186-4116-11e4-a123-002590d4bdbb     N/A  ada1p2
gptid/762b42f1-4116-11e4-a123-002590d4bdbb     N/A  ada2p1
gptid/7637a646-4116-11e4-a123-002590d4bdbb     N/A  ada2p2
gptid/768edc23-4116-11e4-a123-002590d4bdbb     N/A  ada3p1
gptid/769a5b3b-4116-11e4-a123-002590d4bdbb     N/A  ada3p2

They are all the same drive, same size, ordered the same day, etc... But I have 4x3 tb drives... What's going on with this? Why does this show 8 drives in addition to the usb drive I'm using? So I found hopefully another useful way to find specific info just in case it might help whoever wants to help me with this.

Code:

[root@freenas] /mnt/v1# gpart list |more
Geom name: da0
modified: false
state: OK
fwheads: 255
fwsectors: 63
last: 31405790
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: da0p1
   Mediasize: 524288 (512k)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 17408
   Mode: r0w0e0
   rawuuid: 2a3514cd-a81d-11e4-9e59-002590d4bdbb
   rawtype: 21686148-6449-6e6f-744e-656564454649
   label: (null)
   length: 524288
   offset: 17408
   type: bios-boot
   index: 1
   end: 1057
   start: 34
2. Name: da0p2
   Mediasize: 16079216640 (15G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 544768
   Mode: r1w1e1
   rawuuid: 2a3d8caa-a81d-11e4-9e59-002590d4bdbb
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 16079216640
   offset: 544768
   type: freebsd-zfs
   index: 2
   end: 31405783
   start: 1064
Consumers:
1. Name: da0
   Mediasize: 16079781888 (15G)
   Sectorsize: 512
   Mode: r1w1e2

Geom name: ada0
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 5860533134
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: ada0p1
   Mediasize: 2147483648 (2.0G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r0w0e0
   rawuuid: 75725812-4116-11e4-a123-002590d4bdbb
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2147483648
   offset: 65536
   type: freebsd-swap
   index: 1
   end: 4194431
   start: 128
2. Name: ada0p2
   Mediasize: 2998445412352 (2.7T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e2
   rawuuid: 757db659-4116-11e4-a123-002590d4bdbb
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2998445412352
   offset: 2147549184
   type: freebsd-zfs
   index: 2
   end: 5860533127
   start: 4194432
Consumers:
1. Name: ada0
   Mediasize: 3000592982016 (2.7T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e3

Geom name: ada1
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 5860533134
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: ada1p1
   Mediasize: 2147483648 (2.0G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r0w0e0
   rawuuid: 75cbb813-4116-11e4-a123-002590d4bdbb
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2147483648
   offset: 65536
   type: freebsd-swap
   index: 1
   end: 4194431
   start: 128
2. Name: ada1p2
   Mediasize: 2998445412352 (2.7T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e2
   rawuuid: 75d77186-4116-11e4-a123-002590d4bdbb
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2998445412352
   offset: 2147549184
   type: freebsd-zfs
   index: 2
   end: 5860533127
   start: 4194432
Consumers:
1. Name: ada1
   Mediasize: 3000592982016 (2.7T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e3

Geom name: ada2
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 5860533134
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: ada2p1
   Mediasize: 2147483648 (2.0G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r0w0e0
   rawuuid: 762b42f1-4116-11e4-a123-002590d4bdbb
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2147483648
   offset: 65536
   type: freebsd-swap
   index: 1
   end: 4194431
   start: 128
2. Name: ada2p2
   Mediasize: 2998445412352 (2.7T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e2
   rawuuid: 7637a646-4116-11e4-a123-002590d4bdbb
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2998445412352
   offset: 2147549184
   type: freebsd-zfs
   index: 2
   end: 5860533127
   start: 4194432
Consumers:
1. Name: ada2
   Mediasize: 3000592982016 (2.7T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e3

Geom name: ada3
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 5860533134
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: ada3p1
   Mediasize: 2147483648 (2.0G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r0w0e0
   rawuuid: 768edc23-4116-11e4-a123-002590d4bdbb
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2147483648
   offset: 65536
   type: freebsd-swap
   index: 1
   end: 4194431
   start: 128
2. Name: ada3p2
   Mediasize: 2998445412352 (2.7T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e2
   rawuuid: 769a5b3b-4116-11e4-a123-002590d4bdbb
   rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 2998445412352
   offset: 2147549184
   type: freebsd-zfs
   index: 2
   end: 5860533127
   start: 4194432
Consumers:
1. Name: ada3
   Mediasize: 3000592982016 (2.7T)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e3

So you can see why I'm having trouble here! It looks like everything is fine but it sure isn't showing up in the GUI. I checked the documentation for FreeNAS and I don't see anything in there to address this issue as far as I can tell! Any help is appreciated greatly!

Also if worse comes to worse and I have to format every drive and start from scratch, it's not the end of the world, just want to see if I don't have to spend another month or so downloading everything again!

 

[danb35]

Try 'zpool export v1', and then use the Import Volume button in the GUI.

 

[Aberu]

Sometimes the simplest things can sneak right by you. Ah well. Thanks a bunch that did the trick! Appreciate it very much!

FIXED!

 

[Aberu]

Oh noes there were various other issues. Just starting over because I know a lot more about it now when I get home.

 

[Orca04]

Hi,

I exported and reimported, but I still cannot attach the volume. When I go to shell, I do see my imported volume FreeNAS1, but when I try import volume manager, I still see the blank dialog like the one on the second picture. Please could you tell me how you imported. You mentioned that you had various other issues. I am having same issue.

Thanks

Orca04