I've done some searching before I posted this but everything I've tried hasn't fixed my problem.
I've got one drive (ada3) that keeps throwing this error. Per this thread I swapped the SATA cable with no luck.
smartctl –a /dev/ada4 gets this
zpool status -v returns this
I also found another post where they had commands (dd commands) to repair the bad area of the disc, but I can't find right now. I tried the commands and they wouldn't run. So that's why I'm here.
The only thing I haven't tried yet is swapping SATA ports on the mother board and seeing if the errors follow the drive or the port. That's next.
Any other ideas?
I've got one drive (ada3) that keeps throwing this error. Per this thread I swapped the SATA cable with no luck.
smartctl –a /dev/ada4 gets this
Code:
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-STABLE amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red (AF) Device Model: WDC WD10EFRX-68JCSN0 Serial Number: WD-WMC1U5316668 LU WWN Device Id: 5 0014ee 6ad43ffe3 Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Sep 3 21:20:28 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12960) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 148) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 138 135 021 Pre-fail Always - 4091 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 96 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7105 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 96 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 86 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 9 194 Temperature_Celsius 0x0022 114 107 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 10% 7049 1953523152 # 2 Short offline Completed: read failure 10% 7046 1953523152 # 3 Short offline Completed: read failure 10% 7043 1953523152 # 4 Short offline Completed: read failure 10% 7040 1953523152 # 5 Short offline Completed: read failure 60% 7037 1953523152 # 6 Extended offline Completed: read failure 10% 7028 1953523152 # 7 Short offline Completed: read failure 60% 6801 1953523152 # 8 Short offline Completed: read failure 60% 6777 1953523152 # 9 Short offline Completed: read failure 60% 6753 1953523152 #10 Short offline Completed: read failure 60% 6729 1953523152 #11 Short offline Completed: read failure 60% 6710 1953523152 #12 Short offline Interrupted (host reset) 90% 6705 - #13 Short offline Completed: read failure 60% 6686 1953523152 #14 Short offline Completed: read failure 60% 6662 1953523152 #15 Short offline Completed: read failure 60% 6638 1953523152 #16 Short offline Completed: read failure 60% 6614 1953523152 #17 Short offline Completed: read failure 60% 6590 1953523152 #18 Short offline Completed: read failure 60% 6566 1953523152 #19 Short offline Completed: read failure 60% 6542 1953523152 #20 Short offline Completed: read failure 60% 6518 1953523152 #21 Short offline Completed: read failure 60% 6494 1953523152 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
zpool status -v returns this
Code:
pool: freenas state: ONLINE scan: resilvered 1.27M in 0h0m with 0 errors on Sun Sep 1 15:59:45 2013 config: NAME STATE READ WRITE CKSUM freenas ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/10efd3f1-1a1c-11e2-86a1-000e04b77199 ONLINE 0 0 0 gptid/114dadc7-1a1c-11e2-86a1-000e04b77199 ONLINE 0 0 0 gptid/11aa50f8-1a1c-11e2-86a1-000e04b77199 ONLINE 0 0 0 gptid/1206470c-1a1c-11e2-86a1-000e04b77199 ONLINE 0 0 0 gptid/1264c2f2-1a1c-11e2-86a1-000e04b77199 ONLINE 0 0 0 gptid/12c11d81-1a1c-11e2-86a1-000e04b77199 ONLINE 0 0 0 errors: No known data errors
I also found another post where they had commands (dd commands) to repair the bad area of the disc, but I can't find right now. I tried the commands and they wouldn't run. So that's why I'm here.
The only thing I haven't tried yet is swapping SATA ports on the mother board and seeing if the errors follow the drive or the port. That's next.
Any other ideas?