shnurov
Explorer
- Joined
- Jul 22, 2015
- Messages
- 74
After my latest move, the device never booted back up.
Plugging and getting the static IP for IPMI, it's possible to get the standard Megarac web interface.
The Java Applet runs and we're able to start and reset the system, but the video screen is the default size black and at 0fps. Not possible to shut down the system via the interface either.
We are running BMC 0.30, thinking that updating it to 0.35 would help. We're stuck in that process as well.
No browser in Mac OS, even via a virtualized Windows system, the 'blue box' that should appear to upload the firmware isn't there.
These were the steps followed
www.truenas.com
A screen with VGA has been ordered to see if that could help to see what the issue is.
Plugging and getting the static IP for IPMI, it's possible to get the standard Megarac web interface.
The Java Applet runs and we're able to start and reset the system, but the video screen is the default size black and at 0fps. Not possible to shut down the system via the interface either.
We are running BMC 0.30, thinking that updating it to 0.35 would help. We're stuck in that process as well.
No browser in Mac OS, even via a virtualized Windows system, the 'blue box' that should appear to upload the firmware isn't there.
These were the steps followed
SOLVED - C2550D4I NO POST, NO VGA OUTPUT VIA IPMI
Hi, All. Thanks for replying this thread. I eventually solved the problem with the help from ASRock william@asrockamerica.com According to william Lee, here are the steps that I performed. 1/ I want you to use only stick of RAM installed in the blue slot A1, and make sure both ends of the...

A screen with VGA has been ordered to see if that could help to see what the issue is.