cdgonzalez
Dabbler
- Joined
- Dec 19, 2014
- Messages
- 21
Build in signature
Server was non-responsive couldn't get into the GUI, was able to get into IPMI and restart. I now get nothing on startup just a blank/black screen (both via IPMI or VGA).
IPMI is still fully responsive I can get in, shutdown, restart etc. sensor data also looks fine. Unplugged all drives and left only a single RAM in the A1 slot, no change.
I want to say the board is toast, I patched for Watchdog as soon as the fix was out but the box is going on 4 years. The fact IPMI appears 100% is throwing me off, any ideas?
Server was non-responsive couldn't get into the GUI, was able to get into IPMI and restart. I now get nothing on startup just a blank/black screen (both via IPMI or VGA).
IPMI is still fully responsive I can get in, shutdown, restart etc. sensor data also looks fine. Unplugged all drives and left only a single RAM in the A1 slot, no change.
I want to say the board is toast, I patched for Watchdog as soon as the fix was out but the box is going on 4 years. The fact IPMI appears 100% is throwing me off, any ideas?