Brand new HDDs - some error after a while

[mst]

Device: /dev/da6 [SAT], 2 Currently unreadable (pending) sectors raid1 setup


What I can do about it?

 

[mst]

Code:

smartctl -q noserial -a /dev/da6
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Re
Device Model:	 WDC WD3000FYYZ-01UL1B0
Firmware Version: 01.01K01
User Capacity:	3,000,592,982,016 bytes [3.00 TB]
Sector Size:	  512 bytes logical/physical
Rotation Rate:	7200 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Thu Sep 13 07:23:25 2018 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
										was suspended by an interrupting command from host.
										Auto Offline Data Collection: Enabled.
Self-test execution status:	  (   0) The previous self-test routine completed
										without error or no self-test has ever
										been run.
Total time to complete Offline
data collection:				(34260) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/off support.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 371) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x70bd) SCT Status supported.
										SCT Error Recovery Control supported.
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate	 0x002f   200   143   051	Pre-fail  Always	   -	   0
  3 Spin_Up_Time			0x0027   181   158   021	Pre-fail  Always	   -	   9941
  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   88
  5 Reallocated_Sector_Ct   0x0033   198   198   140	Pre-fail  Always	   -	   73
  7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0
  9 Power_On_Hours		  0x0032   045   045   000	Old_age   Always	   -	   40634
 10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0
 11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0
 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   85
183 Runtime_Bad_Block	   0x0032   100   100   000	Old_age   Always	   -	   0
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   83
193 Load_Cycle_Count		0x0032   200   200   000	Old_age   Always	   -	   8
194 Temperature_Celsius	 0x0022   105   101   000	Old_age   Always	   -	   47
196 Reallocated_Event_Count 0x0032   182   182   000	Old_age   Always	   -	   18
197 Current_Pending_Sector  0x0032   200   200   000	Old_age   Always	   -	   2
198 Offline_Uncorrectable   0x0030   200   200   000	Old_age   Offline	  -	   0
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0
200 Multi_Zone_Error_Rate   0x0008   200   200   000	Old_age   Offline	  -	   15

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline	   Completed without error	   00%	 40445		 -
# 2  Short offline	   Completed without error	   00%	 40444		 -
# 3  Short offline	   Completed without error	   00%	 40443		 -
# 4  Short offline	   Completed without error	   00%	 40442		 -
# 5  Short offline	   Completed without error	   00%	 40441		 -
# 6  Short offline	   Completed without error	   00%	 40440		 -
# 7  Short offline	   Completed without error	   00%	 40439		 -
# 8  Short offline	   Completed without error	   00%	 40438		 -
# 9  Short offline	   Completed without error	   00%	 40437		 -
#10  Short offline	   Completed without error	   00%	 40436		 -
#11  Short offline	   Completed without error	   00%	 40435		 -
#12  Short offline	   Completed without error	   00%	 40434		 -
#13  Short offline	   Completed without error	   00%	 40433		 -
#14  Short offline	   Completed without error	   00%	 40432		 -
#15  Short offline	   Completed without error	   00%	 40431		 -
#16  Short offline	   Completed without error	   00%	 40430		 -
#17  Short offline	   Completed without error	   00%	 40429		 -
#18  Short offline	   Completed without error	   00%	 40428		 -
#19  Short offline	   Completed without error	   00%	 40427		 -
#20  Short offline	   Completed without error	   00%	 40426		 -
#21  Short offline	   Completed without error	   00%	 40425		 -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

[Johnny Fartpants]

Replace it and if still in warranty send it back to the manufacturer.

 

[melloa]

Brand new HDDs - some error after a while

Did you burn your disks before putting into production?

 

[wblock]

9 Power_On_Hours 0x0032 045 045 000 Old_age Always - 40634

It's got a lot of hours on it for a brand new drive.

 

[Ericloewe]

4.6 years of operation, in fact... What's the date of manufacture on the thing? It's vaguely possible that it's reporting a different unit.