RoboKaren
Contributor
- Joined
- Apr 8, 2014
- Messages
- 130
I have a CyberPower UPS attached to my FreeNAS 9.10 system. I also have the UPS daemon set up through the Freenas control panel.
I've never gotten an e-mail from the UPS via FreeNAS saying that the system has experienced a transient or brownout. We recently had a spate of thunderstorms and I know the lights flickered several times.
I'd like it if the UPS (aka FreeNAS) were more talkative, telling me that it's experiencing transients or brownouts. My model has AVR but I'd prefer to know it's alive and doing something.
For example, I really like my daily harddisk temperature and SMART status e-mail via a script that someone posted on this forum. It definitely gives me a heads up as to whether a drive is dying.
This is especially the case when the system is remote.
Is there a way to set the UPS daemon to be more talkative via script or setting? I'd ideally like a daily warning saying that it experienced %x transients and had %y low-voltage (<110vac) events if they occured.
===
I've never gotten an e-mail from the UPS via FreeNAS saying that the system has experienced a transient or brownout. We recently had a spate of thunderstorms and I know the lights flickered several times.
I'd like it if the UPS (aka FreeNAS) were more talkative, telling me that it's experiencing transients or brownouts. My model has AVR but I'd prefer to know it's alive and doing something.
For example, I really like my daily harddisk temperature and SMART status e-mail via a script that someone posted on this forum. It definitely gives me a heads up as to whether a drive is dying.
This is especially the case when the system is remote.
Is there a way to set the UPS daemon to be more talkative via script or setting? I'd ideally like a daily warning saying that it experienced %x transients and had %y low-voltage (<110vac) events if they occured.
===
Code:
upsc ups@localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 3300 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 24.0 battery.voltage.nominal: 24 device.mfr: CPS device.model: CST135XLU device.serial: CR7FT200xxxx device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ugen0.2 driver.parameter.synchronous: no driver.version: 2.7.3 driver.version.data: CyberPower HID 0.4 driver.version.internal: 0.39 input.voltage: 117.0 input.voltage.nominal: 120 output.voltage: 141.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 15 ups.mfr: CPS ups.model: CST135XLU ups.productid: 0501 ups.realpower.nominal: 810 ups.serial: CR7FT200xxxx ups.status: OL ups.test.result: No test initiated ups.timer.shutdown: -60 ups.timer.start: -60 ups.vendorid: 0764