Auto start jail and comands

[Charlie86]

Hi,

After reboot I must manually start jail that I created. How can I configure it to start up automatically? Jail is created in Beta UI because it works only that way ( FreeBSD 11.1 )
Second jail is created in "regular UI" for qbittorrent and after every restart I must enter command in Jail shell "qbittorrent-nox --webui-port=12345" how can I set this to be done
automatically?

Thank you

 

[danb35]

How can I configure it to start up automatically?

iocage set boot=yes jailname

how can I set this to be done automatically?

That answer appears to be in this thread.

 

[garm]

Warden jails can be set to autostart in the legacy GUI and iocage jails can be set to start on boot with CLI.

To autostart services in a jail simply use the rc.d script by setting <service>_enable=“YES” in rc.conf https://www.freebsd.org/doc/handbook/configtuning-rcd.html

 

[Jailer]

Second jail is created in "regular UI" for qbittorrent and after every restart I must enter command in Jail shell "qbittorrent-nox --webui-port=12345" how can I set this to be done
automatically?

You can set the web UI port in the settings in the web GUI for qbittorrent.

 

[danb35]

setting <service>_enable=“YES” in rc.conf

...assuming there's an init script present, which there may or may not be depending on how the software was installed.

 

[Jailer]

There might not be, I had to move the one from my warden jail when I rebuilt it with iocage. If not I can provide the contents easily enough so it can be reproduced.

 

[garm]

Why wouldn’t you install it from ports/pkg? https://svnweb.freebsd.org/ports/head/net-p2p/qbittorrent-nox11/

And if you didn’t, why wouldn’t you reinstall it from ports/pkg?

 

[Jailer]

I installed the package, not sure how @Charlie86 installed it.

 

[Charlie86]

iocage set boot=yes jailname

That answer appears to be in this thread.

Hi,

I try to enable auto boot but after reboot, jail is still down until I power it up manualy.

This is how I did it


root@freenas:/mnt/pinja/Torrents # iocage set boot=yes Logitech

yes is not a valid value for boot.

Value must be off or on

root@freenas:/mnt/pinja/Torrents # iocage set boot=on Logitech

Property: boot has been updated to on


For qBittorrent autostart I created script

1. Autostart qBittorrent
   You will now create a script file to autostart qBittorrent
   Credit to @joeschmuck for the autostart script. Thank you!
   Code:
   nano /etc/rc.d/qbit
   
   Copy and paste the following[/size]
   Code:
   #!/bin/sh
   # File name 'qbit'
   # Place this file into /etc/rc.d
   # Edit /etc/rc.conf to include qbit_enable="YES"
   
   . /etc/rc.subr
   
   name="qbit"
   rcvar=qbit_enable
   
   PATH="$PATH:/usr/local/bin"
   
   start_cmd="${name}_start"
   stop_cmd=":"
   
   load_rc_config $name
   eval "${rcvar}=\${${rcvar}:-'NO'}"
   
   qbit_start()
   {
   # And start up the service.
   
   su qbittorrent -c '/usr/local/bin/qbittorrent-nox -d'
   
   }
   
   run_rc_command "$1"
   

Do I need to do anything else, because I doesn't work ether :D

Why wouldn’t you install it from ports/pkg? https://svnweb.freebsd.org/ports/head/net-p2p/qbittorrent-nox11/

And if you didn’t, why wouldn’t you reinstall it from ports/pkg?

I install it from this thread

https://forums.freenas.org/index.php?threads/auto-start-jail-and-comands.64330/#post-460934

Is this OK?

To autostart services in a jail simply use the rc.d script by setting <service>_enable=“YES” in rc.conf https://www.freebsd.org/doc/handbook/configtuning-rcd.html

Sorry, I read doc twice and have no idea what should I do :).

Do I need to write qbittorrent-nox --webui-port=12345_enable=“YES” ? I am 99% this will not work.