Hi there!
I have a problem with my NAS (FreeNAS 8.3.1 on an HP Microserver N56L) and the UPS (APC Back UPS ES 700). Everything seems to work fine, but after the server is haltet by NUT it does not boot again when power resumes?!? The appropriate setting in the server's BIOS is set to "Always start after power failure".
It used to work with Ubuntu Linux so I don't think this is a hardware issue and it should also work with FreeNAS! My problem seems to be similar to this one:
http://serverfault.com/questions/31...ps-shuts-it-down-when-mains-power-is-restored
But unfortunately I don't know much about BSD and/or NUT to solve it myself... :(
Any suggestions are very welcome!!
Thx!
I have a problem with my NAS (FreeNAS 8.3.1 on an HP Microserver N56L) and the UPS (APC Back UPS ES 700). Everything seems to work fine, but after the server is haltet by NUT it does not boot again when power resumes?!? The appropriate setting in the server's BIOS is set to "Always start after power failure".
It used to work with Ubuntu Linux so I don't think this is a hardware issue and it should also work with FreeNAS! My problem seems to be similar to this one:
http://serverfault.com/questions/31...ps-shuts-it-down-when-mains-power-is-restored
But unfortunately I don't know much about BSD and/or NUT to solve it myself... :(
Any suggestions are very welcome!!
Thx!