m00nraker
Dabbler
- Joined
- Apr 12, 2015
- Messages
- 13
Hi guys.
Problem with my 9.10 setup, showing LSI HBA driver/firmware misatch alert. Can't solve it, maybe a bug, idk.?!
I'm using a Supermicro X10SLH-7 and an AVAGO LSI 9300-8i HBA in it-mode.
This 9300 HBA has installed the Phase 9 (= P9) package for Firmware and BIOS, means:
Firmware Version 9.00, BIOS Version 8.21.
After applying the latest FreeNAS update via the gui I got a yellow blinking alert:
Firmware version 9 does not match driver version 13 for /dev/mpr0. Please flash controller to P13 IT firmware.
I checked the Avagotech support page for new Firmware and BIOS files:
These packs are currently availabe: P9 (is installed on HBA), P10, P11 and P12 (= latest)
But the alert said, P13 is needed. So I decided to install P12, the latest pack from the Avagotech page.
The HBA has now Firmware Version 12.00, BIOS Version 8.29
After booting FreeNAS a new alert showed up:
Firmware version 12 does not match driver version 13 for /dev/mpr0. Please flash controller to P13 IT firmware.
Problem is, there is no P13 IT firmware available for this 9300-8i HBA.
What can I do now? Maybe a bug with the last FreeNAS Update?
Need help please.
Cheers, Kai
Additional information:
sas3flash -listall
Avago Technologies SAS3 Flash Utility
Version 10.00.00.01 (2015.06.18)
Copyright 2008-2015 Avago Technologies. All rights reserved.
Adapter Selected is a Avago SAS: SAS3008(C0)
Num Ctlr FW Ver NVDATA x86-BIOS PCI Addr
----------------------------------------------------------------------------
0 SAS3008(C0) 12.00.00.00 0b.02.00.07 08.29.00.00 00:01:00:00
Finished Processing Commands Successfully.
Exiting SAS3Flash.
Problem with my 9.10 setup, showing LSI HBA driver/firmware misatch alert. Can't solve it, maybe a bug, idk.?!
I'm using a Supermicro X10SLH-7 and an AVAGO LSI 9300-8i HBA in it-mode.
This 9300 HBA has installed the Phase 9 (= P9) package for Firmware and BIOS, means:
Firmware Version 9.00, BIOS Version 8.21.
After applying the latest FreeNAS update via the gui I got a yellow blinking alert:
Firmware version 9 does not match driver version 13 for /dev/mpr0. Please flash controller to P13 IT firmware.
I checked the Avagotech support page for new Firmware and BIOS files:
These packs are currently availabe: P9 (is installed on HBA), P10, P11 and P12 (= latest)
But the alert said, P13 is needed. So I decided to install P12, the latest pack from the Avagotech page.
The HBA has now Firmware Version 12.00, BIOS Version 8.29
After booting FreeNAS a new alert showed up:
Firmware version 12 does not match driver version 13 for /dev/mpr0. Please flash controller to P13 IT firmware.
Problem is, there is no P13 IT firmware available for this 9300-8i HBA.
What can I do now? Maybe a bug with the last FreeNAS Update?
Need help please.
Cheers, Kai
Additional information:
sas3flash -listall
Avago Technologies SAS3 Flash Utility
Version 10.00.00.01 (2015.06.18)
Copyright 2008-2015 Avago Technologies. All rights reserved.
Adapter Selected is a Avago SAS: SAS3008(C0)
Num Ctlr FW Ver NVDATA x86-BIOS PCI Addr
----------------------------------------------------------------------------
0 SAS3008(C0) 12.00.00.00 0b.02.00.07 08.29.00.00 00:01:00:00
Finished Processing Commands Successfully.
Exiting SAS3Flash.