HeinzApfel
Dabbler
- Joined
- Nov 24, 2014
- Messages
- 13
Hello,
I see a lot of AHCI timeouts like:
on the console.
The problem can be reproduced by copying data to my RAID while running smartctl from command line. Multiple calls like smartctl -a /dev/ada0 cause smartctl to hang suddenly after which the timeout appears.
The timeout happens on different drives, not always the same. Also it does not care which drive I call smartctl on.
Does someone have an idea what I could try to avoid these hang and timeouts?
My system is using FreeNAS 9.3-BETA 2014-11-22 on a ASRock C2550D4I, SATA cables and power supply have already been replaced. RAM is ECC, the RAID is based on 11x disk in a RAID-Z3.
Thanks for your ideas and help,
Heinz
I see a lot of AHCI timeouts like:
Code:
ahcich1: Timeout on slot 10 port 0 ahcich1: is 00000000 cs 00000400 ss 0000000 rs 00000400 tfd 40 serr 00000000 cmd 10008a17
on the console.
The problem can be reproduced by copying data to my RAID while running smartctl from command line. Multiple calls like smartctl -a /dev/ada0 cause smartctl to hang suddenly after which the timeout appears.
The timeout happens on different drives, not always the same. Also it does not care which drive I call smartctl on.
Does someone have an idea what I could try to avoid these hang and timeouts?
My system is using FreeNAS 9.3-BETA 2014-11-22 on a ASRock C2550D4I, SATA cables and power supply have already been replaced. RAM is ECC, the RAID is based on 11x disk in a RAID-Z3.
Thanks for your ideas and help,
Heinz