Visseroth
Guru
- Joined
- Nov 4, 2011
- Messages
- 546
I just posted this here..... https://forums.freenas.org/index.php?threads/mounting-failed-with-error-19.13620/page-7
But here is my own post.....
Definitely not solved for me. I just found this post because I'm having the exact same error.
SuperMicro X7DBN
16GB of RAM
12X2TB Seagates
SAT2-MV8 8 port SAS card
I don't have USB3, I wasn't using a USB 3 flash in a USB 2 port. I was using a Compact Flash in a IDE port. After updating from 9.2 to 9.3 I had a black screen with a blinking cursor so I tried to roll it back to 9.2 with a install/upgrade disc via a USB 2 CD ROM.
Error 19
I tried pulling all but 4 GB of RAM
Error 19
Ran a wipe on the CF card
Error 19
Tried installing FreeNAS 9.3
Black screen with blinking cursor
After this I was no longer able to access my CF card. Seems it died after multiple attempts to reinstall that are not listed here.
I tried pulling the SAT2-MV8 card, clearing the CMOS settings and installing to a SATA laptop hard drive via SATA port 0 on the MB
Error 19
I'm at a loss here, my server has been working fine for YEARS and now all of a sudden I'm unable to boot anymore and everything seems to point to something that is not available on my server?
Any ideas, suggestions? Anything?
I've even pulled all my drives to be sure that they aren't causing any errors
Edit: I just tried 9.1 and same thing, error 19
But here is my own post.....
Definitely not solved for me. I just found this post because I'm having the exact same error.
SuperMicro X7DBN
16GB of RAM
12X2TB Seagates
SAT2-MV8 8 port SAS card
I don't have USB3, I wasn't using a USB 3 flash in a USB 2 port. I was using a Compact Flash in a IDE port. After updating from 9.2 to 9.3 I had a black screen with a blinking cursor so I tried to roll it back to 9.2 with a install/upgrade disc via a USB 2 CD ROM.
Error 19
I tried pulling all but 4 GB of RAM
Error 19
Ran a wipe on the CF card
Error 19
Tried installing FreeNAS 9.3
Black screen with blinking cursor
After this I was no longer able to access my CF card. Seems it died after multiple attempts to reinstall that are not listed here.
I tried pulling the SAT2-MV8 card, clearing the CMOS settings and installing to a SATA laptop hard drive via SATA port 0 on the MB
Error 19
I'm at a loss here, my server has been working fine for YEARS and now all of a sudden I'm unable to boot anymore and everything seems to point to something that is not available on my server?
Any ideas, suggestions? Anything?
I've even pulled all my drives to be sure that they aren't causing any errors
Edit: I just tried 9.1 and same thing, error 19