Hey,
I have 4 nics 10GB on FreeNAS and two each host.
I connect each to freeNas with one port on the hosts.
Only one can connect to FreeNAS and the other can't.
My address on FreeNAS:
nic 1: 172.16.10.10/30 -> Go to Host 1 nic 1 -> 172.16.10.9/30
nic 2: 172.16.10.20/29 -> Go to Host 2 nic 1 -> 172.16.10.19/29
nic 3: 172.16.10.30/30 -> Go to Host 3 nic 1 -> 172.16.10.29/30
Only in the master (Host 1) i can connect to FreeNAS and speed like 100Mbps
from host 1 i can see the lun from this -> iscsiadm -m discovery --type sendtargets --portal 172.16.10.10
from host 2 i can see the lun from this -> iscsiadm -m discovery --type sendtargets --portal 172.16.10.20
from host 3 i can see the lun from this -> iscsiadm -m discovery --type sendtargets --portal 172.16.10.30
But i get empty response from this -.> multipath -ll (In all hosts except the host 1 that can connect to FreeNAS).
I config also iSCSI Multipath in xcp-ng and ISCI MPIO in FreeNAS but not success.
Anyone know ?
Thanks.
I have 4 nics 10GB on FreeNAS and two each host.
I connect each to freeNas with one port on the hosts.
Only one can connect to FreeNAS and the other can't.
My address on FreeNAS:
nic 1: 172.16.10.10/30 -> Go to Host 1 nic 1 -> 172.16.10.9/30
nic 2: 172.16.10.20/29 -> Go to Host 2 nic 1 -> 172.16.10.19/29
nic 3: 172.16.10.30/30 -> Go to Host 3 nic 1 -> 172.16.10.29/30
Only in the master (Host 1) i can connect to FreeNAS and speed like 100Mbps
from host 1 i can see the lun from this -> iscsiadm -m discovery --type sendtargets --portal 172.16.10.10
from host 2 i can see the lun from this -> iscsiadm -m discovery --type sendtargets --portal 172.16.10.20
from host 3 i can see the lun from this -> iscsiadm -m discovery --type sendtargets --portal 172.16.10.30
But i get empty response from this -.> multipath -ll (In all hosts except the host 1 that can connect to FreeNAS).
I config also iSCSI Multipath in xcp-ng and ISCI MPIO in FreeNAS but not success.
Anyone know ?
Thanks.
Last edited: