Hi All, Specs: ASRock X370 Killer SLI AM4 AMD AMD Ryzen 9 3900X Seasonic 750W Prime Titanium New CPU Cooler: Deepcool Assassin III (Amazon reference here ) NZXT H700i Tower Recently noted the stock Ryzen fan wasn't performing as adequately as I would have liked (as noted by almost 30c...

So the specs of the build are as follows: mobo: supermicro pdsma+ CPU: intel core 2 duo e4300 8gb ddr2 kingston ram non ecc i will also use a supermicro pci-x card for extra sata connectivity (sat2-mv8 rev3.0) i will add the hdd's later since they are in use and i need to back up the data. I...

Im using a dell vostro 200 with a Pentium 2180 3 WD blue 1TB and a sandisk as a boot drive i used another flash drive as install media. I used Rufus to burn the ISO as per the instruction in the freenas documentation. upon booting off the install media the BIOS completely freezes the dell logo...

So occasionally (seems about once a year if the forums are to be believed) someone encounters the dreaded error message matchname: host name/name mismatch: [Blah IP Address] != (NULL) This is typically "resolved" by disabling Hostname lookups in the SMB service. Which, yes, it does work, if the...

Hi i have just set up a openvpn client in a freenas 9.10u6 jail The service is running and its listening on port 10011 When i put my .opvn file onto my phone it connects and shows upstream traffic but i get nothing downstream i am unable to access the internet or devices on the network See...

This is a college project I'm working on. The equipment I'm working with is a mix of my own and what the college has on hand. Due to this I'm unable to give the specifics of the equipment and I'm only able to test anything when I'm actually there. What details I can give off memory: The CPU is...

I was typing out a tunable when I mistyped a letter. I didn't realize my mistake until I already submitted it. I deleted the tunable and recreated it correctly but immediately after that I received 2 error messages and everything became inaccessible. Going into the CLI this is what it has been...

I set up some network attached iSCSI drives over a 10Gbit network and the performance of it looks like this: From what I have tested it copies about 6~8GB before it crashes like this. For the remainder of the transfer it will jump between 100 - 300MB/s. The physical connection from my...

I am throwing this out there so other people can see this and perhaps use this information to understand what is going wrong with their system. I think I know what the problem is with my system, but I will be happy to learn from anyone that has wisdom to share. I replaced some "old" 2 TB drives...

I'm not entirely sure if this is a known issue or just me not knowing all the underpinnings of how IPMI functions. But Here is my issue if anyone has any insight. I have a SuperMicro Server w/IPMI: Product Name: X9DRL-3F/iF I also have 'LAGG' configured to port bond my two NIC's on the...

I need to view the DDM (Digital Diagnostic Monitoring) function of my SFP+ fiberoptic transceiver (at the request of the retailer I bought it from because it died on day 1) which displays temperature, voltage, noise (dB), and other information. I do not have a network switch. I need a way to...

Of every forum and guide I've searched, everything says my hardware is compatible and that my setting are correct yet the VMs that I create regardless of how many Virtual CPUs I assign report 2. One per physical processor. I learned that this type of issue is due to a number of features that the...