I have screwed up the boot. I use two innodisk SATADOM-SV for the boot mirror, I saw a DEGRADED message in the GUI and did a reboot to see both SATADOM in the BIOS POST, but the GUI still reported DEGRADED. The boot pool status showed one drive as UNAVAIL, so I detached in an attempt to reboot...

Dear all, I have an ESXi 6.7 server running and wanted to try out FreeNAS (version 11.2 U1). However, after installation, the VM does not boot. I followed these instructions: https://www.ixsystems.com/documentation/freenas/11.2/install.html#vmware-esxi My Hardware: Fujitsu D3417-B2 MB C236-AMT...

I'm running a fresh install of FreeNAS 11.2-RELEASE-U1 which worked fine until I added HP NC550SFP 581199-01 10Gbe NIC. With the NIC installed freenas won't boot and throws Fatal trap 12 error, but when I removed the card it works fine. I even tried to do a fresh install but even booting of the...

Hey everyone, I'm a new FreeNAS user who's having issues and can't seem to resolve them through Googling. Please hear me out, but also feel free to chastise me for everything I'm doing wrong so I'll learn. I'll also preface this with the fact that I'm running my FreeNAS off of a USB drive, as...

Im using a dell vostro 200 with a Pentium 2180 3 WD blue 1TB and a sandisk as a boot drive i used another flash drive as install media. I used Rufus to burn the ISO as per the instruction in the freenas documentation. upon booting off the install media the BIOS completely freezes the dell logo...

I just did a update from 9.10 to 11.2 but the system would not boot. It looks like I am getting the below error when it tries to start. I am booting from a USB drive. gptzfsboot: error 32 lba 1 error 1 lba 1654253898819624 failed to clear pad2 area of primary vdev failed to read pad2 area of...

I have done a fresh install of FreeNAS-11.2-BETA2 on a Hyper-V VM. (Windows server 20012 R2) This issue occurred after the initial install of Beta 11.2 so I decided to re-install to eliminate any anomaly causing the issue. After the second fresh install and setup was successful I decided to...

Hello, when i try to install FreeNAS on my new Homeserver it dont works. When i boot from stick the pc loads the file for 1 second and then it returns back to the boot menu. In the Homeserver are only this USB Stick and Mouse, Keyboard and Monitor. I tryed another Stick too and i tryed with...

Hey guys, I'm trying to create a bootable USB stick but apparently something does not work. FreeNAS version: FreeNAS-11.1-U5.iso My hardware: ASRock C236 WSI Intel C236 So.1151 Dual Channel DDR4 Mini-ITX Retail Intel Pentium G4400 2x 3.30GHz So.1151 BOX 16GB (1x 16384MB) Hynix HMA82GU7AFR8N...

I just replaced a faulted drive. My steps are as follows: Find the serial number of the faulted drive Pull drive Replace drive in filer Go to Zpool status in the GUI Select the faulted drive Choose replace Since this drive previously had data on it, select force Hit ok Whole pool goes offline...

I applied the updates via GUI, went into System>Boot and activated 11.1, then rebooted and ate lunch I've tried several time over the last 30 mins to access the GUI and keep getting "Site cannot be reached" The NAS fans are running, so it is powered up. But, I have no idea whether it ever...

Hello! First post. This is likely a BSD kernel issue but I'm pretty new to BSD and not sure how to debug this. Stuff search has pointed me to but not worked: Disable firewire (I dont have firewire) Add the following to /boot/device.hints hint.ata.0.disabled="1" hint.ata.1.disabled="1" This...

Okayyyy. So. Not to put too fine a point on it, I've officially done my unix initiation. You know, the one where you type 'rm -Rfd stuff' and delete / by mistake? :eek::D:D:D:eek: There will now be a brief but mandatory pause for 5 million forum users to die laughing :eek: In mitigation, I...

I shut down my FreeNAS for a few days and when I started it again I was not able to connect to any of my web interfaces. Also SSHing into it was not possible. So I plugged in a monitor and keyboard and I saw a black screen with a blinking cursor. When I restart the FreeNAS after the bios when...

Hi everyone, I have a FreeNAS server running from a USB 3.0 flash drive (config file is backed up). Yesterday I attempted to update from 11.0-U3 to U4 (a seemingly minor update), however, the machine now does not boot. It reaches the boot config screen where disks are detected reporting 6...

Hi, HP DC8000 Core2Duo 12 GB RAM Pendrive SanDisk 16 GB I installed FreeNAS 11, installation finished successful but system halt during starting (black screen with promt: _). I tried to install 9.10 & 9.3 from DVD but it was the same situation. When I used FN 9.2 and put img file directly to...

This is a freenas data disk and can not boot system. System halted. I had a fresh install of FN11 RC3 with 1 volume, 1 dataset, and 1 SMB share. The OS was installed on a 32GB SuperDOM in a SuperDOM port on a SuperMicro MoBo. The volume is composed of 6x6TB WD Reds in RAIDZ2. It was all working...