FlyingPersian
Patron
- Joined
- Jan 27, 2014
- Messages
- 237
Hello,
a while back I had an alert on one of my drives being offline, but I didn't have time to fix the issue and tbh I forgot what the exact issue was. Now, no issues are shown directly with my drives. The GUI and console look kinda suspicious. Here my hard- and software infos:
Disks:
ada2 expanded:
Console:
I ran smartctl -t short /dev/ada2 AND ada3:
ada2:
ada3:
The issues I'm seeing:
1. In the GUI, ada is shown twice
2. In the console, ada3 is shown as ada3p2 only without the gptid stuff.
3. According to the first picture, there has been some resilvering. I can also find that info on the Pool Status page in the GUI:
4. What does all that mean now? Is there n issue with one of my drives? Is it failing?
a while back I had an alert on one of my drives being offline, but I didn't have time to fix the issue and tbh I forgot what the exact issue was. Now, no issues are shown directly with my drives. The GUI and console look kinda suspicious. Here my hard- and software infos:
- TrueNAS-12.0-U6
- 6x WD Red 8TB in RAIDz2
- Boot drive is a SSD connected via a SATA-to-USB cable
Disks:
ada2 expanded:
Console:
Code:
root@truenas[~]# zpool status
pool: Data
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: resilvered 752K in 00:00:01 with 0 errors on Sat Oct 30 22:49:32 2021
config:
NAME STATE READ WRITE CKSUM
Data ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/111dd78e-103b-11e9-b74e-0cc47a406253 ONLINE 0 0 0
gptid/f862c9ea-00b4-11ea-9daf-0cc47a406253 ONLINE 0 0 0
gptid/e79d9e0e-f731-11e9-9ef4-0cc47a406253 ONLINE 0 0 0
gptid/ed4cf2d0-e4eb-11e8-bded-0cc47a406253 ONLINE 0 0 0
ada3p2 ONLINE 0 0 0
gptid/b9c40f77-68f3-11e8-a08d-0cc47a406253 ONLINE 0 0 0
errors: No known data errors
pool: boot-pool
state: ONLINE
scan: scrub repaired 0B in 00:01:22 with 0 errors on Fri Oct 22 03:46:22 2021
config:
NAME STATE READ WRITE CKSUM
boot-pool ONLINE 0 0 0
gptid/a39dbd2e-63d6-11eb-b3a3-0cc47a406253 ONLINE 0 0 0
errors: No known data errors
I ran smartctl -t short /dev/ada2 AND ada3:
ada2:
Code:
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD80EFAX-68LHPN0
Serial Number:
LU WWN Device Id: 5 000cca 252e58c45
Firmware Version: 83.H0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Oct 30 23:01:37 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 93) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1153) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0004 129 129 054 Old_age Offline - 112
3 Spin_Up_Time 0x0007 146 146 024 Pre-fail Always - 449 (Average 449)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 714
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0
8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 8898
10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 684
22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 971
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 971
194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 39 (Min/Max 15/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 7151 hours (297 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 40 18 60 b3 52 40 08 00:22:32.915 READ FPDMA QUEUED
60 80 20 a0 b8 52 40 08 00:22:32.914 READ FPDMA QUEUED
60 40 68 20 b9 52 40 08 00:22:32.914 READ FPDMA QUEUED
60 c0 10 a0 b1 52 40 08 00:22:32.913 READ FPDMA QUEUED
60 80 60 20 b0 52 40 08 00:22:32.913 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8898 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ada3:
Code:
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD80EFZX-68UW8N0
Serial Number:
LU WWN Device Id: 5 000cca 263cd0cc7
Firmware Version: 83.H0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Oct 30 23:04:08 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1284) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 130 130 054 Pre-fail Offline - 120
3 Spin_Up_Time 0x0007 143 143 024 Pre-fail Always - 458 (Average 459)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 737
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 140 140 020 Pre-fail Offline - 15
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 13320
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 707
22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1164
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1164
194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 38 (Min/Max 15/55)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 11574 hours (482 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 e0 b3 52 40 08 00:22:32.940 READ FPDMA QUEUED
60 00 b8 a0 b1 52 40 08 00:22:32.938 READ FPDMA QUEUED
60 40 f0 a0 b3 52 40 08 00:22:32.938 READ FPDMA QUEUED
60 80 b0 20 b1 52 40 08 00:22:32.937 READ FPDMA QUEUED
60 c0 a8 20 af 52 40 08 00:22:32.937 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13320 -
# 2 Extended offline Interrupted (host reset) 90% 13287 -
# 3 Short offline Aborted by host 10% 13282 -
# 4 Short offline Completed without error 00% 11558 -
# 5 Short offline Completed without error 00% 11515 -
# 6 Extended offline Aborted by host 90% 11405 -
# 7 Extended offline Aborted by host 80% 11330 -
# 8 Short offline Completed without error 00% 11251 -
# 9 Short offline Completed without error 00% 11167 -
#10 Extended offline Aborted by host 90% 11096 -
#11 Short offline Aborted by host 10% 11023 -
#12 Extended offline Aborted by host 80% 10855 -
#13 Short offline Aborted by host 10% 10616 -
#14 Short offline Completed without error 00% 10590 -
#15 Extended offline Completed without error 00% 10449 -
#16 Short offline Completed without error 00% 10381 -
#17 Extended offline Aborted by host 70% 10313 -
#18 Short offline Aborted by host 10% 10285 -
#19 Extended offline Aborted by host 80% 10228 -
#20 Short offline Completed without error 00% 10221 -
#21 Short offline Completed without error 00% 10192 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.The issues I'm seeing:
1. In the GUI, ada is shown twice
2. In the console, ada3 is shown as ada3p2 only without the gptid stuff.
3. According to the first picture, there has been some resilvering. I can also find that info on the Pool Status page in the GUI:
4. What does all that mean now? Is there n issue with one of my drives? Is it failing?
